HMs DIY #1-6

Store Link

Because I want to keep this datafield and the app free for use I would be very grateful about a small donation to PayPal

A detailed description of how to use it can be found here: 

HMs_DIY_GUIDANCE.pdf
HMs_DIY_ANLEITUNG.pdf

Thanks very much to mcinner1 for putting so much time into this documentation!

Designer download

You can contribute on my github page.
You can upload your layout so others can use it as well.
Also any changes to the fonts.txt can be updated there as well.

Garmin_HMsDIY

=======================================================================
RELEASE NOTES
=======================================================================
-----------------------------------------------------------------------
3.6.2
* switched to new SDK 7.2.1
* added devices: Approach S7 42mm, Descent Mk3 43mm /Mk3i 43mm, Descent Mk3i 51mm, Edge 1050, epix Pro Gen2 42mm, epix Pro Gen2 47mm / quatix 7 pro, epix Pro Gen2 51mm / D2 mach 1 pro / tactix 7
Fenix 7 Pro, Fenix 7 Pro Solar, Fenix 7S Pro, Fenix 7X Pro, Fenix 7xPro Solar, Forerunner 165, Forerunner 165M, Venu 3, Venu 3S, Vivoactive 5
-----------------------------------------------------------------------
3.5.1
* switched to new SDK 4.2.4
* added devices: FR265, FR265S, FR965, GPSMAP 67/67i, Marq (Gen 2), Marq (Gen 2) Aviator, EDGE 540, EDGE 840, Instinct 2x Solar
* added two new font types GLANCE, GLANCENR (only available if device supports it!)

for full releasenotes see: releasenotes.txt
=======================================================================

 

  • Great program, I've had a lot of fun playing with this. 

    I have a problem with the wind direction triangle. I added one in, but it doesn't point reliably. It seems to always point near the 12 o'clock position, and sometimes near the 6 o'clock position. It doesn't seem to point in relation to the top of the device, nor north, nor to or from wind direction. 

    The wind direction in text works fine, as does a north arrow ( using alternative track mode on a 1040)

    Any thoughts on the wind direction triangle? Using latest beta #6  

    Thanks. 

  • As far as I remember (I wrote the guidance pdf years ago), there is no wind indicating arrow in DIY.
    The arrow  can be set pointing North, Start or any coordinate - but not to wind direction.

  • If the poster is referring to the "North" pointing arrow, then I can confirm it does not work, it points in any direction randomly.

    As for pointing to the "start" or to "coordinates", I have no use for them so don't know if they work or not.

  • New version 3.5.1 is available on all clones.

    regards
    Erich

  • Sounds like you need to select "alternate direction of travel"

  • Power Zones setup.

    I am using DIY to display the Power Zones (PZ) number. I set the FTP and PZ values through Garmin Express, but the value is always off by 1, e.g. when the native Garmin PZ shows 2.5, the DIY PZ show 1.5. I tried different variations of entering the Zones, but can't get it right. Thoughts?

    Maybe I have to start with 0;203;241;264;290;296;319? Will try that.

     Training PeaksGarmin

  • I guess further reading of the docs does say this. But Wind and the Direction triangle _are_ mentioned together in the same section on Heading vs Track.

    Any chance of a feature request to add wind direction to the direction triangle? Cheers, 

    • I don’t think you’re going to get this with DIY. BUT…there is an IQ data field called Windfield that will get your arrow and much more!! It’ll have to be on a Garmin screen, of course. 
  • But Wind and the Direction triangle _are_ mentioned together in the same section on Heading vs Track.

    You‘re right, an I have to apologize for this translation error. It should say „compass rose“.

  • No issues at all, thanks for your input, I thought I might have has a setting wrong and it didn't work, I understand it can't do it, for now...  Cheers.