Move signal and on ExitSleep

Shent-Aurkhan (SHN) over 5 years ago

hi,

I was reported that when the move signal shows up, after that the onExitSleep not work anymore,

the user has to go on widget and go back again to have it works again.

the code is simple,

Sl=false; as global,

on exit sleep = Sl=true;

onUpdate,

if(Sl){...}

does it happen to someone else?

(user has the F6X)

jim_m_58 over 5 years ago

Do you also have

function onEnterSleep() {

SI=false;

Ui.requestUpdate();

}

Shent-Aurkhan (SHN) over 5 years ago in reply to jim_m_58

Hi, yes I have it !

jim_m_58 over 5 years ago in reply to Shent-Aurkhan (SHN)

Are you doing 1hz/onPartialUpdate()?

What you might be seeing is you've exceeded the power budget and onPartialUpdate is no longer being called, but when the move alert occurs, the WF restarts, and you'll again get onPartialUpdate() calls for 1-2 minutes.

With the f6x, and it being 280x280, you may exceed the power budget where you don't on 240x240 or 260x260 devices, as the clip reasons would be bigger and if there are multiple, farther apart on the screen (more rows)

Shent-Aurkhan (SHN) over 5 years ago in reply to jim_m_58

Many thanks for That, but I dont use this on this one.

markdotai over 5 years ago in reply to Shent-Aurkhan (SHN)

onExitSleep has been a problem on my watch (Fenix 5X+) for a long time: https://forums.garmin.com/developer/connect-iq/f/discussion/8010/high-powered-mode-disabled-permanently-during-user-sleep-period - it just seems to stop working if I haven't switched to a widget or something else for some amount of time (unless the back light on glance feature is turned on)

If you search the forums people seem to have been reporting similar problems for years

Here's an older one: https://forums.garmin.com/developer/connect-iq/f/legacy-bug-reports/5129/high-powered-mode-gesture-on-forerunner-935-buggy

Makkas-CIQ over 4 years ago

Well, it seems that fenix 6 models have problems with onExitSleep.

I recently got a report from F6 user that describes the exact same behaviour.

My watchfaces can flip between two "pages" on gesture, page counter is reset in onExitSleep.

I got another report from a tactix delta user telling that gesture (page flip) stops working exactly at midnight 0:00 and he must go to widget and back to fix it.

3848598 8 months ago

Hi,

I have the same issue on Forerunner 245M, did anyone manage to fix it?