Smart Bike Lights (Data Field) / Bike Lights Control (Widget)

Yes, you can specify also the initial speed by adding a Speed filter:

Sure, here is the same configuration for Edge 1040, Varia UT800 and Varia RTL515:

1,1!:1H]0#4587520,196641::1#4,3!NIGHT:1:2:0:0Es0,r0!DAY:2:62:0:0Er0,s0C]4.16667!:1:0:0:0D=1#0,73535488::1#5,4!NIGHT:1:4:0:0Es0,r0!BRAKE:2:4:0:0C]1.94444A[-10!RADAR:1:7:0:0I]-1]0!:1:0:0:0D=1#7,6:Ion 800 RT:0:16777215!2,:-1,Off:0!1,High:1!1,Medium:2!1,Low:5!1,Day Flash:63!1,Night Flash:62#6,5:Varia 515:0:16777215!2,:-1,Off:0!1,Solid:4!1,Peloton:5!1,Day Flash:7!1,Night Flash:6#0::#1:1#123!:123!#0#B3843#9#3#0#0

hello maca88, maybe I have two questions.

1) i'm surprised the big widget doesn't display the group name, it's such a big widget but the current mode information is missing.  It's also not on the small widget. I think it's only on the medium size widget.

2) I can't load working configuration (Invalid configuration) to the editor (maca88.github.io/.../): The config works except the pause activates later than 30sec if ever:

#4587520,196641::1#6,5!STOP:1:0:5:0H{1!PAUSE:1:0:5:30H{2!NIGHT:2:2:5:0B[5Es0,r0!DAY:1:63:5:0Er0,s0!:1:5:0:0D=1#6291461,1409482753::1#8,6!STOP:1:0:5:0H{1!BRAKE:2:1:2:0C}5.55556A{-30!PAUSE:1:0:5:30H{2!NIGHT:1:63:5:0Es0,r0!DAY:2:8:5:0B[5Er0,s0!:1:5:0:0D=1#7,6:Ion Pro RT:0:16777215!2,:-1,Off:0!1,High:1!1,Medium:2!1,Low:5!1,Day Flash:63!1,Night Flash:62#7,6:Flare RT:0:16777215!2,:-1,Off:0!1,Day Steady:1!1,Night Steady:5!1,Day Flash:7!1,All-Day Flash:8!1,Night Flash:63#1:99999:88888#0:0#13!:13!#0#B3122#2#1#0#0

Best wishes.

Thanks a lot

Thank you. I totally missed there are two web pages. Of course, it loads now (maca88.github.io/.../). I don't use Bike Lights at all. I'm using data fields (sorry for wrong naming) like on the picture on the top. On the left part of that picture there's small data field but it displays the group name only if the data field part of the screen is quite big. That is ok, but i'm puzzled the full screen data field doesn't show it.

In light of this, do you still see reason why would SLEEP action work with big delay? Could STOP and SLEEP action both checking timer collide?

I never felt the need to add the group name on the light panel, as I used it only for switching the light or control mode. After that, I switch back to the primary data screen, where I have the data field on a small field. In my case (Edge 1000/1040), the group name is displayed even in the smallest field (10 fields layout). But for smaller devices like Edge 830, it would makes sense to have the ability to display the group name, as it is not displayed when using a 10 fields layout. Therefore, I will add an option to display also the group name inside the S button. Here is an example how it will look like:

I don't quite understand what you mean by SLEEP and STOP actions. Are you referring to the STOP and PAUSE group names in your provided configuration? If yes, you have a delay because you set "Deactivation delay in seconds" to 5 for both STOP and PAUSE groups, which will delay the DAY or NIGHT group for five seconds after the activity is resumed.

That's brilliant. That will allow 830 users to see their modes too. Thank you.

I removed unnecessary delays from the config. I think it's too much. All I wanted is turn off asap when timer stopped, and  turn off with big delay when paused (because timer can pause when driving in traffic jam). Hence, 30 seconds delay which often resulted in 2min delay.

4049204 said:

All I wanted is turn off asap when timer stopped, and  turn off with big delay when paused (because timer can pause when driving in traffic jam)

Then you need to set the "Activation delay in seconds" for PAUSE group and remove all other delays:

#4587520,196641::1#6,5!STOP:1:0:0:0H{1!PAUSE:1:0:0:30H{2!NIGHT:2:2:0:0B[5Es0,r0!DAY:1:63:0:0Er0,s0!:1:5:0:0D=1#6291461,1409482753::1#8,6!STOP:1:0:0:0H{1!BRAKE:2:1:2:0C}5.55556A{-30!PAUSE:1:0:0:30H{2!NIGHT:1:63:0:0Es0,r0!DAY:2:8:0:0B[5Er0,s0!:1:5:0:0D=1#7,6:Ion Pro RT:0:16777215!2,:-1,Off:0!1,High:1!1,Medium:2!1,Low:5!1,Day Flash:63!1,Night Flash:62#7,6:Flare RT:0:16777215!2,:-1,Off:0!1,Day Steady:1!1,Night Steady:5!1,Day Flash:7!1,All-Day Flash:8!1,Night Flash:63#1:99999:88888#0:0#13!:13!#0#B3122#2#1#0#0

4049204 said:

Hence, 30 seconds delay which often resulted in 2min delay.

This could happen in case the timer was resumed for a short time within 30 seconds. If that happens, the delay will be reset, meaning you will need to wait another 30 seconds to activate the PAUSE group. 

Hi maca88!

Thanks for great app! I have one question. RTL510 + Fenix 7. Is there any possibility to configure it to be always off and only blinks while detects car? BUT I MEAN THE DEFAULT DETECTION BLINKING, the chaotic one. Or I only should choose one of the the modes like steady on, day blink, night pulsing?