Smart Bike Lights (Data Field) / Bike Lights Control (Widget)

I've made two open source CIQ applications to control ANT+ lights:

- Smart Bike Lights (data field): https://apps.garmin.com/en-US/apps/0d9fd828-c932-4470-9c37-fd2828881888

Configurator: https://maca88.github.io/SmartBikeLights/

- Bike Lights Control (widget): https://apps.garmin.com/en-US/apps/fa3c2332-76e3-4ba1-8528-32a0fd617ab1

Configurator: https://maca88.github.io/BikeLightsControl/

Smart Bike Lights features:
- Automatic light control (Smart mode) based on the configured filters (sunset, sunlight, speed, ...)
- Manual light control (only for Edge devices with a touch screen or devices with CIQ 3.2 and more than 32KB memory)
- Records lights modes that are displayed in Garmin Connect

Bike Lights Control features:
- Manual light control (available to all devices)

Both applications can be installed on the same device, which can be useful for low end devices (e.g. Edge 520) where "Bike Lights Control" can be used to change light modes manually and "Smart Bike Lights" for automatic light control.

Currently registered ANT+ lights:
- Bontrager Ion Pro RT
- Bontrager Ion 200 RT
- Bontrager Flare RT
- Garmin Varia RTL500
- Garmin Varia RTL510
- Garmin Varia RTL515
- Garmin Varia HL500
- Garmin Varia UT800

in case your ANT+ light is not on the list you can help by doing the following:

1. Install Bike Lights Control
2. Pair your bike light with your Garmin device
3. Open the widget:
- Edge with a touch screen: post which numbers are displayed on the buttons and what mode each button represents when pressed
- Other devices: Select the "Light modes" menu and post which numbers are displayed in the menu and what mode each menu item represents when selected

Example for Bontrager Ion Pro RT:

1 -> High steady beam
2 -> Medium steady beam
5 -> Low steady beam
63 -> Day flash
62 -> Night flash

There are some features that could be possible to add in the future, but would require Garmin to add them to the CIQ api. In case you are interested in any of the below features, consider upvoting their feature request thread:

1. Control lights based on the ambient light sensor available on some devices:
https://forums.garmin.com/developer/connect-iq/i/bug-reports/ambient-light-sensor-api-access

Top Replies

maca88 over 3 years ago in reply to Prozorowicz +4

> Yes, I'd still rather have it as a widget

Ok, I will look into that and report when it will be published.

> using the Ion Pro lamp in auto mode and in parallel with your field does not remove…
maca88 over 3 years ago in reply to oo0M0oo +4

Hi oo0M0oo,

This is the configuration for the desired behavior:

###0,73535488#2,2|RADAR:1:7:1I]-1]0|:1:0:1D=1##5,4:Varia 510|2,:-1,Off:0|1,Solid:4|1,Day Flash:7|1,Night Flash:6#B3122##3#0#0

but make sure…
maca88 over 2 years ago in reply to Prozorowicz +2

Prozorowicz said:
Add the ability to save several configuration files, one of which would of course be selectable for the currently used field

That is what I plan to do, but with such feature it will still…

All Replies

Battery Drain over 3 years ago in reply to maca88

Yes, everything works fine!

Need to remove the radar from the list of sensors and find the light and radar again.

6661553 over 3 years ago

hi，i use the following config with my Forerunner 935 and flare RT

default mode night steady，sunset or sunrise change to flash

###6291461,1409482753#3,3|night:1:63Es1800,r-1800|day:1:7Er-1740,s1740|:1:5D=1###B2691##1#0#0

but when the network connected ，the light turn on，still night steady，didn't change to flash

what should i do，thanks！

maca88 over 3 years ago in reply to 6661553

Hi,

you need to enable GPS on your watch as sunset/sunrise is calculated based on your location. When the GPS is disabled the "Timespan" filter containing a sunset/sunrise is skipped, this is why the default mode "Night Steady" is active in your case.

tjj1664 over 3 years ago in reply to maca88

Use "acceleration" filter, Light mode is in "DAY FLASH" mode, can you add a custom time length? to make the light flash longer
Thank you for your help and hard work

maca88 over 3 years ago in reply to tjj1664

I can try to add an additional setting to set the minimum time the filter is active when the condition is met. I will inform you when the setting will be released.

hotdogpartysausage over 3 years ago

I've been using the data field on my 1030 with great success.

I quite often do long distance rides on roads that can have traffic but often are traffic free for some distance. If I forget to turn the light off from the app the battery can die long before I get home. To conserve the battery I was wondering if it was possible to implement an automated mode, which would turn the light off unless a vehicle was detected, where it would turn the light on in the mode that had been configured?

maca88 over 3 years ago in reply to hotdogpartysausage

It is possible by implementing a filter that uses the radar to detect whether there is any vehicle behind you. Also as the api supports it, I can add an optional setting to set on which vehicle distance the filter start to be active. The only problem is that I don't have a Varia light to test it. I can implement the filter but I will need someone that is willing to test the filter. In case you can help me test the filter I can implement it in the next version.

hotdogpartysausage over 3 years ago in reply to maca88

Excellent. Sure no problem, I'd be glad to help

Even if it was just activated on a vehicle detection & deactivated on all clear would be as good as anything for me. Will be looking forward to see what you come up with

tjj1664 over 3 years ago in reply to maca88

Because using your program, I have implemented the brake lights, I want to make the brake lights flash longer, I made some repetitive filters, and when I ride into the tunnel, I have implemented the night flash automatically

Thank you so much for your help

###0,73535488#17,10|BRAKE1:2:7A<-3C>2.22222|BRAKE2:2:7A<-6C>2.22222|BRAKE3:2:7A<-10C>2.22222|BRAKE4:2:7A<-15C>2.22222|BRAKE5:2:7A<-20C>2.22222|BRAKE6:2:7A<-25C>2.22222|BRAKE7:2:7A<-30C>2.22222|GPS:1:6G<4|NIGHT:1:6Es1800,r-1800|:1:0D=1##6,5:Varia 515|2,:-1,Off:0|1,Solid:4|1,Peloton:5|1,Day Flash:7|1,Night Flash:6#B3570##3#0#1

maca88 over 3 years ago in reply to tjj1664

Your configuration can be simplified to:

###0,73535488#5,4|BRAKE1:2:7A<-3C>2.22222|GPS:1:6G<4|NIGHT:1:6Es1800,r-1800|:1:0D=1##6,5:Varia 515|2,:-1,Off:0|1,Solid:4|1,Peloton:5|1,Day Flash:7|1,Night Flash:6#B3570##3#0#1

filter groups BRAKE2 to BRAKE7 will never be activated as BRAKE1 covers all cases from -3 to -30 acceleration. Are you still interested in having an additional "timer" or does this configuration work as you would like to?