HRM Dual - plastic battery cover separated from screws

Nicolas L. 4 months ago

First time I change my battery on mu HRM Dual :

Support tell me it's not under garanty anymore, poor quality, won't buy Garmin strap anymore.

I will continue to keep it attached with an electrician tape but in my opinion it's a really bad design....

Top Replies

Matthew 2 months ago +2

3D print

www.thingiverse.com/thing:4846914
Data 3 months ago in reply to Nicolas L. +1

First try if Garmin will replace it. If they don't, electrical tape may hold it, Perhaps self-vulcanizing rubber tape works better, it is really good at waterproofing antenna connectors outdoors. I don…
Data 2 months ago in reply to Matthew +1

Thank you for sharing this! New life for my broken HRM2 :-)

All Replies

0 Dr Phil 4 months ago

Is it possible you’ve done something wrong? I’ve lost count of the number of times I’ve changed mine without issues. Also not aware of any other reports of this over the years.

0 Grumpy from dawn till dusk 4 months ago

It looks as if you have used way too much force on the upper screws and this way broken the plastic, sorry to say.

Like philipshambrook wrote, personally I have also done a couple of battery changes and the battery cover is ok. So for the next strap, whatever brand it is, be careful.
That the design, using four screws, is not the best, I agree. Makes it too complicated, compared with a "twistlock"

0 Nicolas L. 3 months ago in reply to Dr Phil

It seems I'm not the only one, and it brokes when I removed the screws... I was very carefull to not force on anything.

HRM Dual - plastic battery cover separated from screws - Accessories & Sensors - Running/Multisport - Garmin Forums

0 Data 3 months ago in reply to Nicolas L.

First try if Garmin will replace it. If they don't, electrical tape may hold it, Perhaps self-vulcanizing rubber tape works better, it is really good at waterproofing antenna connectors outdoors. I don't know how good it is or how bad it smells at body temperature and exposed to sweat though. (I have a HRM-2 or 3, same design, with a broken cover that I plan to repair that way, but didn't do that yet).

0 Nicolas L. 3 months ago in reply to Data

yeah I fixed it with electrical tape. But in my opinion it is not normal and a very bad design/quality.
They proposed me to replace for a 50% rebate, I don't want to pay, my belt works perfectly with the lectrical tape.

0 Matthew 2 months ago

3D print

www.thingiverse.com/thing:4846914

0 Data 2 months ago in reply to Matthew

Thank you for sharing this! New life for my broken HRM2 :-)

0 Nicolas L. 2 months ago in reply to Matthew

Thank you Matthew, I will give it a try !

0 5882931 2 months ago in reply to Grumpy from dawn till dusk

Great post and thank you for sharing. I was considering that option and found this post so changed my opinion.

0 freewheelixxx 1 month ago in reply to Nicolas L.

same here. just noticed it. It wasnt connecting because of that for me.