Fenix 6 Sapphire BATT

Former Member over 5 years ago

On the default watch face you get the estimated days remaining for the battery. Mine shows "BATT 5d". Does anyone know where that estimate is coming from because my watch is at 99% showing 5d. I've reset the watch and performed all the updates via express but it still shows 5days without battery saver and 47 days with battery saver. Any ideas?

Thank you.

Top Replies

C.sco over 5 years ago +1

I had everything (for the most part) turned on when I set up my watch initially, and it showed 10d on a full charge. I changed the PulseOX setting from "always" to "while sleeping", and the battery meter…
gaijin over 5 years ago in reply to Former Member +1

Long press the UP button to access the MENU>Sensors & Accessories>Pulse Oximeter>Sleep Pulse Ox [Toggle On/Off]>Acclimation [Toggle All Day/Manual]

When you toggle Sleep Pulse Ox OFF it…

All Replies

0 Former Member over 5 years ago

My F6 pro sapphire titanium shows 14 days with everything on and default battery.

0 chuckmcgee over 5 years ago

Mine went from 21d as configured out of the box, to 10d on a full charge with my current settings. I have no idea what settings I changed to affect that. I am curious, though. Tracking this thread.

0 Former Member over 5 years ago

That is the thing. I wasn't sure what I had set to make it show only 5 days of battery so I reset it. Now when I got it out of the box and charged it up to 100% it showed 15 days so go figure. I'm going to try the reset once more to see if anything changes.

0 C.sco over 5 years ago

I had everything (for the most part) turned on when I set up my watch initially, and it showed 10d on a full charge. I changed the PulseOX setting from "always" to "while sleeping", and the battery meter bumped up to 15d.

I, too, would be curious to see what else I can turn off to improve the battery life, I was really hoping to get it to 20+ days, but I'm not sure what else I could turn off.

It would be cool if someone could compile a list of all the settings that affect battery life, and by how much.

edit: I should mention mine is a 6x, not a 6

0 Former Member over 5 years ago

same Watch / Model:

Unboxing watch and setup, then i had 10d left.

After a short time, i had only 5d left battery at 100%

So what happens?

Reset twice done already.

0 Matt_Barrett over 5 years ago

I have 6d at 53% charge for a fenix 6s pro. Live at sea level so pulse Oxy is off as there is little point, smart phone notifications off and screen brightness at 5%. Not sure why everyone says sapphire is not clear, perfectively readable with those settings

0 Former Member over 5 years ago

I turned off PulseOX setting but nothing changed with RestBatt.

So where you can set PulsOX to Sleep only? O can only turn of / on in general.

0 Volker over 5 years ago in reply to Former Member

Have you the phone connection enabled?

0 Former Member over 5 years ago in reply to Former Member

Alrighty instead of resetting again I changed the following. I turned off all day Pulsox, Pulsox Sleep Tracking, and Activity Tracking. I'm now at 11 days. When I turn down screen brightness to 10% I'm at 15 days. So there you have it.

0 Former Member over 5 years ago

In resetted twice my watch, connected to my Note 10 Plus.

Now have 14d left for Battery.

Whats going on?

And why you have 2 settings for: I turned off all day Pulsox, Pulsox Sleep Tracking

I can only disable it for sleeping, but do not found for all the day ??