• Replies 1042 replies
  • Subscribers 101 subscribers
  • Views 257196 views
  • Users 0 members are here
Options
Related

Watchface: M2

markdotai
over 4 years ago

This is the support thread for the M2 watchface:

 has created a Facebook group for designs here: https://www.facebook.com/groups/423319952037948

And this PDF files contains a quick visual index to the designs posted in this thread: >>>    ForumProfiles1.pdf    <<<

To create your own design or modify one, install & use the M2 Designer app on your watch. These are the steps you would go through:

  • Optionally paste a text code into the "Profile Text" setting of M2 Designer & save the settings, or load one of your previously saved designs (either via the settings or the in-app menu).
  • Run the M2 Designer app (found underneath your activities list) and create your design.
  • Once you've finished, open the Garmin settings for M2 Designer.
  • The text code in "Profile Text" will now represent whatever your design looks like, so copy the text code from "Profile Text" - and be careful to select the whole text.
  • Close the settings for M2 Designer.
  • Open the Garmin settings for M2 (watchface) instead.
  • Delete any text that was already in "Profile Text" - this step helps to avoid potential problems
  • Paste the text code into "Profile Text".
  • Save the settings.
  • Now when you view the M2 watchface it will show your changes.

A guide for accessing the Garmin settings is here: https://forums.garmin.com/developer/connect-iq/w/wiki/14/changing-your-app-settings-in-garmin-express-gcm-ciq-mobile-store.

Profile text for the default display = 01Ys2525111WDPO1011WwWO020Vc121VZ11WwXw03X7C11WwVd035C13NC13XDC19010000

------------------

Notes on 12-hour and 24-hour display options - see 4 posts down (with Oldest first) ...

See the latest posts by clicking newest (if it is visible just below) or using the page navigation (if visible at the very bottom).

  • over 3 years ago in reply to aliencillo

    I just realized. Many thanks !!!

  • over 3 years ago

    Ho cambiato il bel viso di Aliencillo a mio piacimento

    01ZC2525111WDPO1141X6Y104M133N E14C133NE13NE13NC13NE13NE13NE1 3NE14G133NE14F131X6WV02JVd53NH 121Vd51X6Vu03NC13VnC14Q1Vf3NC1 3NC13WoC14B1Vf1VkY10XOM1G70W10 X6YqYVVh1X6Yf03X7E23NC135E270W 10X6MYVVh1X6D03VeE24R1Vf7020X6 XTZC57020X6WkZC570Vf0X6VjYs170 Vf0X6YVYs170Vf0

    X6WOZ2170Vf0X6XpZ211WJY10WMC1G1XyY10ZCG1G1YRY104F1G1XBY103VaC13UF11X6Yf03X7C13ND135C11WuD03VeC1X6WOZ2170Vf0X6XpZ211WJY10WMC1G1XyY10ZSG1G1YRY104F1G1XBY103VaC13UF11X6Yf03X7C13ND135C11WuD03VeC1
  • over 3 years ago

    Hi folks,

    I thought I'd share a simple face inspired by what I had in M1+. I really enjoy the sleek nature of the design and really appreciate the work Mark has put into it. Editing in the designer on a touch based Vivoactive 3, however, is nothing short of a nightmare.

    Here it is:

    01Ys2525111WDPO1011WwWO023Vc121VZ11WwXs03X7713N7236913N713XD911WwVm0X8F03WsF0VqXeO0VwXOO023N724R0Vw3Ve713N71YQI01ZCH013Va719410000

    Enjoy!

    The notification indicator changes colors when notifications are present. The red phone is only visible when disconnected. The battery changes to the empty battery when the battery is low.

  • over 3 years ago in reply to jance

    can you put a picture?

  • over 3 years ago in reply to Francesco

    I updated the original post Grinning

  • over 3 years ago

    I have a couple of questions because I'm being a bit dumb. 

    How do you get the solid colour semi circles at the top and bottom of the faces

    And how do you make a ring work as a counter, for example, battery with notches on the side and a moving arrow indicator. I hope I've explained this clearly enough. 

    Will also post on the Facebook page. 

  • over 3 years ago

    I have a couple of questions because I'm being a bit dumb. 

    How do you get the solid colour semi circles at the top and bottom of the faces

    And how do you make a ring work as a counter, for example, battery with notches on the side and a moving arrow indicator. I hope I've explained this clearly enough. 

    Will also post on the Facebook page. 

  • over 3 years ago in reply to Jack681

    I haven't checked their actual designs but I think this is the way to create them:

    >>>>> How do you get the solid colour semi circles at the top and bottom of the faces

    First create a dial and set the style of it to "rectangle", and set the data to "plain color".

    Then you can change the width to be really wide (use the +10 increase option) and height to be how big you want it to be. Then move it to the top of the display.

    So it's really just a huge rectangle at the top or bottom of the display.

    Also make sure to move it earlier than other items you want to draw on top of it.

    >>>>> And how do you make a ring work as a counter, for example, battery with notches on the side and a moving arrow indicator.

    I think they will be using multiple rings - again you can draw one with "plain color". Or use multiple rings for multiple colors, and change the start and end of the arcs so they cover different sections of your "counter".

    Then on top of that you would need to draw another ring with the data you want to display, but set the filled and unfilled colors to be "unset" (which means they don't get drawn). Set the "value" color to be whatever color you want - this will only draw one of the ring segments in that color, to indicate where the current value is.

    You can maybe do something similar using the dials if you want a smaller circle - by using the "hand" style to draw a marker for the current value on top of another circle underneath.

  • over 3 years ago in reply to markdotai

    @markdotai thank you I think I've figured it out now

  • over 3 years ago

    hi Mark, is it possible to insert an indicator (up / down arrow) for the increase or decrease of atmospheric pressure?