Sensors and Recording (Expected or Bug)

1) DataField or App?
2) Are you calling session start on it?
3) What sensors are you requesting for access? HR? or something else?

typically, when you request for the sensor, it will get enabled and you will get the data output (without user invervention)

More details of your predicament would help

Sorry, maybe I didn't provide enough detail.

I have an App, which provides data on your Heart Rate. This currently uses the Sensor implementation and works fine (with Sensor.setEnabledSensors and Sensor.enableSensorEvents). I now want to allow the user to record sections of this (with ActivityRecording.createSession and ActivityRecording.save).

In the simulator: The user can monitor HR, and then press Record. The session is 'recorded' and the App works normally during and after.
On a Vivoactive:: The App works fine while monitoring heart rate, but when recording is started, it never does and the Sensor stops sending HR data, so the previous monitoring stops with no new HR readings.

Thanks
Chris

I've not seen this myself. I have a couple apps that user the HRM, Tempe, and footpod that enable before I start recording (I wait for GPS and/or a user action to do that), and do lots of testing on a vivoactive.

Thanks Jim. I have no trouble until the Recording is started.

Is there any way of getting more information, when ActivityRecording.createSession returns null?

If you're getting null, there's something wrong with your call to create the session

here's how I do the create/start

session = Record.createSession({:name=>"Hike", :sport=>recordTypes[recordType][0]});
session.start();

(recordTypes is something like "Record.SPORT_HIKING" )

What does your createSession look like?

If you're getting null, there's something wrong with your call to create the session

here's how I do the create/start

session = Record.createSession({:name=>"Hike", :sport=>recordTypes[recordType][0]});
session.start();

(recordTypes is something like "Record.SPORT_HIKING" )

What does your createSession look like?

Thanks again Jim. My code is:
Sensor.setEnabledSensors([Sensor.SENSOR_HEARTRATE]);
Sensor.enableSensorEvents(method(:onSensorHR));


And

_recordingSession = Recording.createSession({ :name => "hRecovery 01 Jan 2016", :sport => Recording.SPORT_TRAINING , :subsport => Recording.SUB_SPORT_EXERCISE });


As originally highlighted, I don't get null in the simulator

Nothing jumps out at me, but what happens if you remove the subsport, and then maybe trying SPORT_RUNNING? If that works, see what breaks it when you add/change it.

Ok, I've come back to this and solved the problem. Hopefully helpful for those reading later.

It was a mistake on my behalf and a bug/improvement required on Connect IQ (in my view).

My mistake:
- My name is longer than 15 characters, and I missed this point highlighted in the documentation. Also I cut the code down above (which I've now amended) for brevity, which is probably why also nobody spotted it as I was adding the date taking it over 15 characters.

Problem:
- On the Vivoactive Simulator this is never picked up and all works ok.
- On the Vivoactive Device it acts really odd (thus throwing me off the scent) but causing the Sensors to stop and the function (starting the recording) to exit early with no crash.

Improvement:
- Can the createSesson just return null when this happens?

Thanks
Chris

We'll look into it.

To clarify, on vivoactive, you are seeing the createSession API crash the app when you provide a name longer than 15 characters? I am pretty sure it should just truncate the name and work normally, so we should get that fixed.