Edge 1030 (v7.5) syncing problem

Yes I tried it, but it's always the same.

And the devices works, but when they work "toghether" I have problems.

strange, from my Edge 1030 i get often a disconnect/connect message on Andorid GCM, business as usual with edge, but it works the most time when you try it again, my Fenix 5 is mostly connected correctly, their i haven't the problems.

other things you could try, if possible, to use a different phone or a tablet, iOS or Android, so you can see, if it is a iOS GCM problem or a problem of your phone directly

Today, I don't know if it is relevant, I had no issue with sync and live track during my ride. First time since I've updated to 7.5

This is what I did:

1. I disabled WI-FI on iPhone
2. I turn on Edge 1030
3. I forgot to home my hearth rate sensor so I used my Fenix 5 in hearth rate broadcast mode
4. Live track worked well during the entire ride (1 hour and 30 minute ride)
5. I come back home and everything synched well

BUT

Once I turned on WI-FI another time Garmin Connect stops to work. For example when I try to access the Training Status page the it show only the "loading icon" (the little man running). I had to restart Garmin Connect only and another time it restart to work.

All other application on iOS (Strava, Facebook, Messages, ...) works well without need to be restarted, and all other bluetooth device works well another time without need to be restarted.

Hi dahs1e.  My 1030 is doing exactly the same as yours.  Did you ever find a solution?

Hi LeeJones, the thread is 3 years old. I remember that after a firmware upgrade the issue disappeared. I don't know if there is another problem today.