This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Edge 530 stuck on startup screen

Bit of a long shot.

I am on a cycling tour in France and am depending on my brand new Edge 530 for navigation.

Unfortunately it crashed/hung today. The soft reset doesn’t works and it is stuck on the start up screen - loading courses, workouts and locations.

I cant find any information on doing a hard reset

Any clues, pointers on how I can get it working for tomorrow?

Top Replies

All Replies

0 changrenyong over 5 years ago

By soft reset, do you mean pressing and holding the power button for at least 10 seconds?

0 aweatherall over 5 years ago in reply to changrenyong

Can you mount it to a computer. If so delete the contents of the Garmin\NewFiles folder

Force to Mass Storage:

Power the device off
Press and hold the lap button while plugging into usb (with or without factory cable)
Wait 10 seconds and device should go to mass storage

+1 kkilmurray over 5 years ago in reply to aweatherall

Did this work for anyone? I have the same issue, but neither my laptop nor desktop recognize the device.

0 aweatherall over 5 years ago in reply to kkilmurray

Is the USB cable you are using a power+data cable or just a power cable? If the unit starts charging, but does not go into mass storage mode you may want to try a different cable.

0 CyclistDavid over 5 years ago

This worked for me, had to try twice as i didn't get the timing right the first time (holding power til it went off, plugging cable in and holding lap button)

There was a 3mb .fit file in there, possibly the cause but a LOT of new files. deleted the lot and it started fast as normal.

0 5685246 over 4 years ago

Holding down the power button amd bottom left button for ten seconds reset the unit. Now I can upload todays ride.