Related
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

firmware 3.00 constantly reboots

5016572
over 1 year ago

I connect to Express and updated to 3.00 firmware a few days ago.

It will reboot. if:

  • Start a ride then a press of the start/stop button.
  • Start a ride on a course, After 20 or 30 seconds it will reboot.
  • Setting -> Data Pages then a press of the start/stop button

If a ride is started it can't be stopped it will display "ride in progress". Cycling power has no affect. I can get out of this mode by connecting to Connect via USB.

I tried Reset -> Delete All, but that did not solve the problem.

The err.log file has the same error in it many times.

Any suggestions? Is there a way to load 2.90 firmware?

3558 (Edge 130 Plus) SW ver: 300
Build Type: RELEASE
Commit:4734d78ff0dd2485b103889afed419cf176ee764
ESN: 3348761875
09/02/23 08:58:05
RTL
errnum: 0x034
r0: 0x1ffc9ca8
r1: 0x00000000
r2: 0x00000000
r3: 0x00000000
r4: 0x2003fd00
r5: 0x00000000
r6: 0x20031758
r7: 0x1ffff924
r8: 0x00000018
r9: 0x00000001
r10: 0x1ffff924
r11: 0x0481b9c4
r12: 0x1ffff920
r13: 0x1ffc9a08
r14: 0x1ffc99c8
r15: 0x046ba157
r16: 0x00000000
r17: 0x80000000
r18: 0x40000000
r19: 0x00020000
r20: 0xe000ed38
r21: 0xe000ed34
r22: 0x00000000
Stack frame PC, SP: 0x0008f249, 0x1ffc9900
Call Stack - SP at 0x1ffc9900:
    0x0007ec39
    0x0000334f
    0x046ba157
    0x046ba157
    0x046ba1ad
    0x04696495
    0x0470e53f
    0x04698ac1
    0x0469e5d3
    0x0469b495
    0x0469997b
    0x0474790f
    0x047fbfbd
    0x0469b141
    0x0469f0db
    0x04711da3
    0x0473f569
    0x0469b141
    0x046988bf
    0x04697411
    0x04699e7b
    0x0000857f
    0x04697411
    0x000927bf
    0x0469747b
    0x0000857f
    0x000aa27d
    0x0469c533
    0x000084f9
    0x04697959
    0x04697459
    0x04697959
Uptime: 35676

Top Replies

All Replies

  • 0 over 1 year ago

    I have this same issue, i was prompted for a firmware update and now when I try to start a ride it instantly reboots after selecting the route type (i.e. 'Road')

  • 0 over 1 year ago

    I found a solution from forums.garmin.com/.../hard-reset-by-hardware

      Non-prompted non-vol clear – Power down. Hold UP + DOWN keys. Press power key. Release up key after first beep. Release down key after second beep.

    I had tried this other procedure a few days ago but it didn't solve the issue.

      Prompted non-vol clear – Menu>System>Device Reset. Choose between “Restore Settings” or “Clear All Data”

  • 0 over 1 year ago in reply to 5016572

    This worked! Thank you for posting this. 

    The Non-prompted non-vol clear solved the issue for me.

  • 0 over 1 year ago

    Actually it didn't completed work the first time after I Paired to Connect on phone since it caused the same problems. SO I decide to incremental install from scratch and test at each step.

    Deleted Connect from phone.Tried the soft reset. Checked operation: 130+ seemed to be working as expected using start\stop button.

    Loaded a course via USB. Checked operation:  130+ still seems to be working as expected : ride, navigation, data fields.

    Installed Connect on phone, Paired to 130+. Loaded course via Bluetooth. Checked operation:  130+ still seems to be working as expected ride, navigation, data fields.