This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

FW 14.50 Bug: wrong power zone ranges from Anaerobic to Neuromuscular

Since FW 14.20: wrong power zone ranges from Anaerobic to Neuromuscular, all other zones are correct:

Zone 6 248 to 3999 Watt and Zone 7 greater then 4000 Watt, thats impossible on Connect Web and GCM iOS:

It works on android. Have you tried to redefine the power zones(at least 6 and 7) and try again to know if issue persists?

0 f|33tStA over 2 years ago in reply to AlbertoGaMo

power zones going crazy the last days, Running power zones switched to cycling power zones and so on, so Garmin have to look on it

0 AlbertoGaMo over 2 years ago in reply to f|33tStA

It's weird. Same models and firmware show different issues on each device.

0 f|33tStA over 2 years ago in reply to AlbertoGaMo

it is really weird, after yesterday rides new FTP detected and not it looks OK

0 mutnig over 2 years ago in reply to f|33tStA

I have issues with the auto-update after a new FTP was detected: my setting is to use only 7 Zones, and FTP auto detection.

It sets Zone 7 to a single value: 149% - 149%

This results in wrong calculation of time in zone as mentioned already in the 1030 forum: https://forums.garmin.com/sports-fitness/cycling/f/edge-1030/273789/powerzones-wrong-time-in-zone

0 Peetie over 2 years ago in reply to mutnig

Same here, after every New FTP detection I have to reset power zones.( This is the fastest method in fw 14.20) And I use HR zones based on LTHR that has similar error, the zone % settings are switching to other values, reset zones solves this also.

0 raphnou over 2 years ago

Hello,

Sorry i use google translation.

I have a bug as mentioned on this topic with the distribution of power and heart rate zones.
I just noticed another bug, each time the edge detects a new maximum heart rate when it has never been reached and is not visible in the activity graphs.
I'm leaving a successful edge 830 for a rolls 1040 solar full of bugs...

0 Peetie over 2 years ago in reply to raphnou

14.20 detected my LTHR 169 and the same time it detected max hr 184 (1.09*Lthr). My max hr was before set to 190. I dont really know this behaviour is normal or bug, but i dont care about max hr because my zones are based on LTHR, and the edge detects it. ( Or something random number...)

0 f|33tStA over 2 years ago

wrong power zone ranges coming back (but now in the other direction) in FW 14.50, now all my power zones shifted, my vo2max Zones are shifted as my Threshold Zones, my Threshold Zones as my Pace Zones and so on!

My Threshold is 175-199 Watt and not 149-174 Watt, my vo2max is 200 - 247 Watt and not 175-199 Watt, why this always changing without any interaction by me?