Waypoints are not appearing on Up Ahead screen of my 1040 Solar

Strange.

Could you post the course fir file here?

How did you load the course file on to the 1040?

The course was created from scratch on Garmin Connect app and transferred via the 'send to device' option.

Link to Fit file (hopefully you can access it, tried to upload it but strangely for a Garmin forum it wont let me upload a fit file, also tried to open file in notepad so I could copy and paste but it's just gobleygook)

https://1drv.ms/u/s!AhYbEr2qsSKOgsJ_COurzS_Cy8VhwQ?e=UmE4on

Thanks for looking at this.

I am experiencing the exact same thing! Thought I was going mad… no courses are loading waypoint data ( they all work fine on my 830!) Have created and sent new courses to Device via Garmin Connect (windows and iOS) to no avail.

I’m seeing course points on my unit. I will check the course file later today. 

It is unlikely, but check that course points for that course are not switched off.

Navigation-> courses -> course 

then the 3 dot menu in the top right hand corner of the screen.

course points on/off

The problem appears to be with the way GC has created the file in that all the course points in it are set at zero distance into the course

...

Here is screen shot from a course that I built to see what the course point icons look like.

This sounds like a GCM course authoring issue.

Try authoring a course in Garmin Connect on the web and see if you get the same issue.

I will try creating a course in the app. Are using an iOS or Android phone?

I got the course point to show when just loading the course, but not starting it, but it shows at zero distance into the course, which is wrong. I will raise a ticket with Garmin