Sensor Drop-outs on Version 6.30

Try to change all the connections to Bluetooth and see if it is better.

I will try Bluetooth but regardless, Ant+ should work without issue.

The recovery of your settings works without difficulty. I've been routinely doing this all the way back to the 500. 

Power and Cadence at the same time and quite frequently on my Edge 1030+. Running dual vectors, speed, cadence and HR. The device cannot handle multiple sensors. Going to load the latest beta firmware to see if that cures the problem

Problem solved: no more disconnection

here's how Garmin on Twitter helped me:

- Do an activity removing ALL sensors and phone from the 1030+.

- Then, check if all your devices are up to date.

- Do an activity again by reconnecting all your sensors and phone.

And there, surprise: no disconnection in 6 hours of activity. Even the alerts on the 1030+ work.

It was more than a year that I encountered these disconnections in bursts. The last update was supposed (6.50) to fix these "ANT bursts".)

I'm very happy now to be able to ride my bike without this constant fireworks of beeps!

From moderator: Boby1, please note that multiple identical posts will cause the 3rd such post (this one) to be flagged as potential spam and need a moderator to review it. I've approved, but please try to avoid this in the future. Thank you.

Duplicate posts here: https://forums.garmin.com/sports-fitness/cycling/f/edge-1030-plus/309711/random-disconnection-connection-of-sensors-and-phone-edge-1030/1525256#1525256

and here: https://forums.garmin.com/sports-fitness/cycling/f/edge-1030-plus/309711/random-disconnection-connection-of-sensors-and-phone-edge-1030/1525256#1525256