I recently installed the latest update for the Descent G1. After the update I'm seeing some pretty massive issues rendering the dive computer unusable.
The watch seemed fine until I took it out for the first dive since the update. As soon as I touched the water the depth gauge immediately jumped to 3500 feet and started sounding off alarms left and right. I assumed it just needed a surface pressure reset so I followed through the instructions to reset the surface pressure back to 0.
The issue still persists. The watch will randomly enter into dive mode without warning (days after having entered the water). Once its in dive mode the depth reading starts going crazy! It will jump from 0 to 20 feet in a matter of seconds then back to 0 again. I tried taking it for a dive to see it's readings under pressure and at about 30 feet actual depth it was reading 2 feet, then it would jump to 60 feet then back to 20 feet, then 0 feet.
Another weird one is the Temperature was reading over 150 degrees F.
The watch itself is quite new, I've used it on less than 10 dives with a depth no greater than 30 feet.
Is anyone else experiencing similar issues?
