On my Edge 530, I keep getting repeated inReach Found alerts

I assume you have the Edge paired as iR remote control device. This kind of thing can occur when the devices are on the margin of effective ANT+ range. If the problem still occurs with the devices near one another, open a support ticket.

In my experience, the more frequent symptom is repeated "searching for inReach" messages. However, my experience is with a watch, not an Edge.

Thank you for the reply.

I've read about the weak ANT+ signal and have moved the inReach from behind me in my hip pack to a side pocket so my body will no longer be between the inReach and the 530.

I have also run into problems with water bottles in the hip pack. With an M1 in the pack between the water bottles, ANT+ connectivity to a watch on my wrist is considerably worse than the same situation with no water bottles. Touchy for sure.

Putting the inReach in a side pocket maintained the ANT+ connection, but it kept losing the satellite signal.

I guess I'll live with the lack of the inReach Remote function - the satellite signal is more important.

Unfortunately, both the M1 and M2 are notorious for poor GPS reception. They are slow to acquire and frequently lose lock. The only solution I have found is to give the Mini a clear sky view. For a cyclist, the top of a fanny pack is sometimes the best you can do. The Mini does have a regular spine mount. I don't know if the there is handlebar mount or not.

I've turned off ANT+ on the inReach Mini - too many "found" messages even with the inReach on my belt, less than 18 inches from the Edge with no obstruction between the devices.

I'm not going to bother with a support ticket, as the inReach stays paired with my phone and I'm not doing without my Garmin devices by sending them in.

I may go back to 9.10 on the Edge, but probably not.