This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Montana 750i Chirp

Hi friends,

I try programming Chirp, but its looooong time when montana 750i found Chirp, and when click for details or programming, montana power off, you also have this problem?

Top Replies

atlas_cached over 4 years ago in reply to ASKERFAKA +1 verified

Thank you for the video!

I did some more testing and found different issue than you are reporting. I am sending all data to Garmin engineers for inspection. Safe to say, CHIRP function on Montana 7x0 currently…

All Replies

0 atlas_cached over 4 years ago

Firmware Version?

0 ASKERFAKA over 4 years ago in reply to atlas_cached

Fw 6.40

0 atlas_cached over 4 years ago in reply to ASKERFAKA

OK let me test later today and I'll let you know what I find...

For clarity, is the Chirp you are reading blank or does it have data already?

0 ASKERFAKA over 4 years ago in reply to atlas_cached

Montana 680t found this Chirp cca 3m distance, and 750i near 3cm and nothing.... Have data, not blank

0 atlas_cached over 4 years ago in reply to ASKERFAKA

Is chirp searching enabled? My Montana 750i finds chirp within 5 seconds of enabling....

0 ASKERFAKA over 4 years ago in reply to atlas_cached

Yes, enabled, but if 750i after 2-5minutes found it, i touch info(programming Chirp) 750i power down

0 atlas_cached over 4 years ago in reply to ASKERFAKA

Change language to english, reboot, retest chirp please

0 ASKERFAKA over 4 years ago in reply to atlas_cached

Same as my language:(

After reboot same as before...

0 atlas_cached over 4 years ago in reply to ASKERFAKA

Still crashes?

Next step is (unfortunately) a Master Reset.

How do I Master Reset my Montana 7x0?

Power the Montana 7x0 off.
Remove battery pack for >30 seconds and reinstall.
Press and hold the Power button until the Status LED turns red.
Release the Power button.
The Montana 7x0 is now in 'Boot Block' mode, which last about 8 seconds.
Quickly press and release the Power button twice.
The Status LED will turn green, and the device will begin the boot process.
A "Restoring settings and activities to defaults." message will be displayed.
The Montana 7x0 is now clearing all data and restoring all settings to factory defaults.