Montana 750i Chirp

Firmware Version?

Fw 6.40

OK let me test later today and I'll let you know what I find...

For clarity, is the Chirp you are reading blank or does it have data already?

Montana 680t found this Chirp cca 3m distance, and 750i near 3cm and nothing.... Have data, not blank

Is chirp searching enabled? My Montana 750i finds chirp within 5 seconds of enabling....

Yes, enabled, but if 750i after 2-5minutes found it, i touch info(programming Chirp) 750i power down

Change language to english, reboot, retest chirp please

Same as my language:(

After reboot same as before... 

Still crashes?

Next step is (unfortunately) a Master Reset.

How do I Master Reset my Montana 7x0?

• Power the Montana 7x0 off.
• Remove battery pack for >30 seconds and reinstall.
• Press and hold the Power button until the Status LED turns red.
• Release the Power button.
• The Montana 7x0 is now in 'Boot Block' mode, which last about 8 seconds.
• Quickly press and release the Power button twice.
• The Status LED will turn green, and the device will begin the boot process.
• A "Restoring settings and activities to defaults." message will be displayed.
• The Montana 7x0 is now clearing all data and restoring all settings to factory defaults.