hi guys, the seal on my left pedal keeps popping out onto the pedal spindle. It slots back in to the 4 gaps but over the next 20 mins slides out up against the crank end of the spindle.
There are two seals in there, an outer dust seal (with the four fingers) and an inner waterproof seal. It may be that the inner seal has moved out of position and it's preventing the dust seal from re-seating properly. You might have to pull the pedal body off the spindle to re-seat everything. There's a full exploded diagram and instructions here: https://www8.garmin.com/manuals/webhelp/vector3/EN-US/GUID-1614637F-1B8A-466C-A208-9CA9EA626921.html
ive done this and re built the left hand pedal which this is happening on. Mid there any chance I can get some spare seals as the outer one (with 4 tabs) seems to have some wear on the tabs themselves...
