This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Edge 130 Service menu

Hi,

I got to the I think it is service menu by mistake. Have couple of questions;

1. C/NA SAT 16 or C/NA Full, I have changed it just by pressing down and dont remember what was the default setting. Could some one check it please?

2. Battery 3.69 15, is the second number (15) the % of the remaining battery? The first I believe is voltage.

Thanks,

root
  • 1) Mine is C/NO SAT 16
    2) looks like it's battery level percentage
  • Thanks for checking that up. I have played little bit with it and no matter what I set, it is always set to C/NO SAT 16 when I start the device.
  • How do you access this menu ?
  • How do you access this menu ?


    Press power button to start devise. When on leading screen (Garmin logo) press and hold down return/cancel button until service menu appears on the screen.
  • Former Member
    0 Former Member over 4 years ago in reply to root

    How can you exit this menu? i accidentally got stuck in this settings menu. 

  • A long press of the power button should force a restart. 10 to 20 seconds

  • What can you check and what can you (safely) change/set in this service menu?

  • Good question, I would like to know this too. When in service mode I have stepped through various screens by pressing the Return/Lap Key. One of them turns the whole screen into a set of rectangles increasing in size from the centre outwards, which is kind of hypnotic if you stare at it and I guess is a test of the display. Another has the heading 'Backlight' and has five squares spaced around the perimeter, some of which can be switched from blank to black and the Backlight % value can be increased/decreased between 0-100. Very mysterious!

  • I also stuck in this service menu and cannot exit. Already tried many times pressing down and hold power button for while, but again service menu shows up.

    While pressing power button, screen shows up saying :
    “To send location, check phone location and try again.”
    So tried to connect smart phone using bluetooth but it dose not recognize edge. 
    Just as a try, connected to PC by cable but was same.
    Can anybody give me suggestion?