This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Garmin 1030 Sram AXS sequential shift warning

Hi all

I recently upgraded my bike to Sram AXS from a bike with Di2.

I had my Di2 set up as sequential shifting (simple one but up gear and one button downgear) the shimano system sorts out both front and rear deraillers to choose the next appropriate gear. The Garmin 1030 pre warns the rider that a front derailler change is about to happen next gear change, making it easy for the rider to adjust pedal stroke before it happens.

Since adding the Sram axs I cannot find a way to get this warning on the Garmin.. anyone now how to add it?

Top Replies

ZuhMan over 4 years ago +1

The shift warning with the Di2 is from the Shimano side. I would contact Sram to see if this info is being transmitted to the Edge in the first place.

All Replies

0 ZuhMan over 4 years ago

The shift warning with the Di2 is from the Shimano side. I would contact Sram to see if this info is being transmitted to the Edge in the first place.

0 The Monk over 4 years ago in reply to ZuhMan

I would contact Sram.... but apparently they are very busy and not answering customer questions... Only dealer help available