This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

FW 10.00 not detected by GE

I installed the version 10 FW yesterday from the zip file link in the notification about the update. The 1030 knows that it's running version 10 when I have a look at System / About, but GE (v7.12 Windows) still thinks that it's on version 9.50. I thought that mismatch only happened with beta versions of FW.

0 jgforrest over 4 years ago

Can't find my 1030 to check, but my 830 says V6.00 which is the equivalent. Also GE 7.12.

If I can dig out my 1030 I'll check and update.

0 cheracogoff over 4 years ago

My 1030 is showing 10 firmware and Express also shows it as 10. Garmin Express is 7.12.0 on Windows

0 jgforrest over 4 years ago

Yes my 1030 also says V10 in GE, Edge need a restart?

0 AuldNik over 4 years ago in reply to jgforrest

The 1030 had already had a couple of restarts - once for the installation of the FW and the second when I did a full reset on it. This morning GE does see it as running version 10. I suspect that only seeing 9.50 yesterday was because the rollout was only at 20%, and the serial number of my unit was not part of that 20% rollout.

0 jgforrest over 4 years ago in reply to AuldNik

Thats interesting, hadn't considered the rollout would affect the Garmin Express knowledge of versions.