This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Edge 1030 Loss of turn by turn navigation functionality since firmware 8.0.0 update

I've been on a couple of rides since updating to firmware 8.0.0 and I seem to have lost turn by turn navigation. Now I only seem to get a few turn by turn alerts (on a 20 km ride today I only got one turn alert - this was using a gpx file that worked perfectly well before the update). Also the distance to the next turn is not displayed. For most of my ride today I just got a useless "Follow the course" message - not very helpful.

Has anyone else noticed this?

  • Update. I think the problem was due to the fact that my preferred route planner site, bikemap.net, has changed its route planner engine. bikemap.net's route planner was excellent before they updated, but now it's virtually unusable. I've tried plotaroute.com, which seems to be quite good - it allows you to download your planned routes as fit files to transfer to your Garmin. The rides I've planned with plotaroute.com do give turn by turn directions with firmware 8.0.0.

  • I've tested a gpx file today, which had worked perfectly well before the update, but now all I get is the track to follow on the map screen. I get no alerts when approaching a turn. Is anyone else experiencing similar problems? I've built up quite a big library of gpx routes - I'll be very disappointed if I cant use them anymore.

  • I've not seen this, but check that TBT did not get disabled. 

    Go to saved courses then select the hamburger icon (bottom right) and check that Turn Guidance is enabled. Also check that your maps are enabled.

    Are you using the Garmin supplied maps?

  • Note that the Edges require track files (a list of points that accurately traces the path you want to follow).

    Unless the route planner isn't producing a track file, your problem isn't the route planner.

    Other than being a track file, there is no magic in the file required to have turn guidance. Every route planner that I've seen produces track files that will work.

    As was pointed out, check to make sure "turn guidance" hasn't been disabled.

  • Thanks. I have checked and Turn Guidance is turned on. I am using Garmin Maps. The enabled maps are INTL Standard Basemap, NR; Garmin Cycle Nap EU, North East, 2019 10; Garmin DEM Map EU 2017 20; Garmin Geocode Map EU 2019 10; Garmin Cycle Nap EU, South West, 2019 10.

  • Thanks. It's just strange that gpx files that worked perfectly well before the update have now stopped working.

  • Maybe, PM me with a link.

    The Garmins convert GPX and TCX files to FIT files.

    Keep in mind that GPX and TCX files are text files. They are easy to look at (there's a good chance they'll make some sense to you!)

    There isn't any special magic in the files.

    Keep in mind that the track has to follow roads that are on the installed map (it doesn't have to be exact but closer is better).

    If you see the track (and it follows the roads), it should work.

  • Thanks for your help everyone. I've just ridden a route using a fit file generated on plotaroute.com and I've got TBT functionality back. Still disappointed that my gpx files generated on bikemap.net do not work on the Edge 1030 any more since the firmware update. It means I've got to start from scratch and plan all those routes again

  • Gpx should still work (if it's the proper type of gpx file).

    It's not likely the update broke it.

    Something else might be going on.

    You should see a list of turns when pressing the text at the top of the map with turn guidance enabled.

    Provide the gpx file that came from that site that doesn't work.

    Use a private message, if you like. 

    Does gpx from plotaroute work?

  • Thanks for getting back. I honestly don't understand why those gpx file that I created on bikemap.com do not work anymore. I've got hundreds of them. I used to have a Bryton Rider 60 before I upgraded to a Garmin 1030 and they worked on that and, until I updated to firmware 8.0.0, they also worked on the Garmin 1030. I attach a short gpx file generated on bike.map. Sorry I can't upload a gpx file so I paste a gpx file generated on bikemap.com converted to plain text  by GPS Visualizer

    type	latitude	longitude	altitude (m)	name	desc
    T	51.519890000	-0.092020000	37.0	Barbican to Natural History Museum	
    T	51.519940000	-0.092000000	37.0		
    T	51.520040000	-0.092460000	37.0		
    T	51.520110000	-0.092550000	37.0		
    T	51.520270000	-0.092610000	37.0		
    T	51.520670000	-0.092440000	34.0		
    T	51.520800000	-0.092430000	33.0		
    T	51.520850000	-0.092450000	33.0		
    T	51.520920000	-0.092570000	32.0		
    T	51.520930000	-0.092680000	32.0		
    T	51.520110000	-0.097070000	26.0		
    T	51.520080000	-0.097310000	26.0		
    T	51.520010000	-0.097460000	26.0		
    T	51.519860000	-0.098120000	26.0		
    T	51.519670000	-0.098790000	25.0		
    T	51.518890000	-0.101140000	21.0		
    T	51.518510000	-0.102400000	23.0		
    T	51.519260000	-0.103010000	24.0		
    T	51.518570000	-0.105240000	18.0		
    T	51.518520000	-0.105320000	18.0		
    T	51.518020000	-0.106980000	24.0		
    T	51.517900000	-0.107280000	26.0		
    T	51.517730000	-0.107510000	28.0		
    T	51.517740000	-0.107720000	29.0		
    T	51.517700000	-0.107820000	30.0		
    T	51.517790000	-0.108740000	31.0		
    T	51.517930000	-0.109910000	31.0		
    T	51.518090000	-0.111060000	30.0		
    T	51.518170000	-0.111360000	30.0		
    T	51.518260000	-0.112400000	30.0		
    T	51.518280000	-0.112910000	30.0		
    T	51.518250000	-0.113810000	31.0		
    T	51.518170000	-0.114730000	31.0		
    T	51.518050000	-0.115930000	32.0		
    T	51.517850000	-0.117480000	39.0		
    T	51.517850000	-0.117480000	39.0		
    T	51.517770000	-0.118230000	39.0		
    T	51.517700000	-0.119020000	38.0		
    T	51.517650000	-0.120160000	36.0		
    T	51.517410000	-0.121700000	35.0		
    T	51.517280000	-0.122410000	36.0		
    T	51.517270000	-0.122880000	37.0		
    T	51.517290000	-0.122970000	37.0		
    T	51.517300000	-0.123050000	37.0		
    T	51.517130000	-0.124870000	34.0		
    T	51.517100000	-0.124980000	34.0		
    T	51.517080000	-0.125340000	33.0		
    T	51.517020000	-0.125750000	33.0		
    T	51.517050000	-0.125830000	33.0		
    T	51.516980000	-0.126270000	34.0		
    T	51.516910000	-0.126890000	35.0		
    T	51.516800000	-0.127500000	38.0		
    T	51.516570000	-0.129030000	38.0		
    T	51.516510000	-0.129470000	37.0		
    T	51.516440000	-0.129770000	37.0		
    T	51.516410000	-0.129960000	36.0		
    T	51.516400000	-0.130260000	36.0		
    T	51.516410000	-0.130540000	36.0		
    T	51.516400000	-0.130940000	36.0		
    T	51.516130000	-0.134120000	37.0		
    T	51.516120000	-0.134120000	37.0		
    T	51.516050000	-0.134660000	36.0		
    T	51.515840000	-0.136760000	36.0		
    T	51.515110000	-0.136180000	33.0		
    T	51.514830000	-0.137200000	35.0		
    T	51.514090000	-0.139930000	36.0		
    T	51.513650000	-0.141340000	34.0		
    T	51.513600000	-0.141430000	34.0		
    T	51.513150000	-0.141960000	33.0		
    T	51.512770000	-0.142470000	31.0		
    T	51.512730000	-0.142590000	31.0		
    T	51.512620000	-0.143170000	29.0		
    T	51.512280000	-0.144560000	29.0		
    T	51.512110000	-0.145040000	29.0		
    T	51.511590000	-0.147810000	30.0		
    T	51.511200000	-0.149770000	31.0		
    T	51.511150000	-0.150000000	31.0		
    T	51.511080000	-0.150140000	31.0		
    T	51.510800000	-0.151680000	34.0		
    T	51.510670000	-0.152520000	35.0		
    T	51.510060000	-0.155850000	34.0		
    T	51.510060000	-0.155860000	34.0		
    T	51.509920000	-0.156530000	32.0		
    T	51.509920000	-0.156650000	31.0		
    T	51.509940000	-0.156850000	31.0		
    T	51.510020000	-0.157210000	31.0		
    T	51.510050000	-0.157260000	31.0		
    T	51.510270000	-0.157470000	32.0		
    T	51.510840000	-0.157920000	33.0		
    T	51.510780000	-0.158290000	33.0		
    T	51.511000000	-0.158410000	32.0		
    T	51.511050000	-0.158460000	32.0		
    T	51.511390000	-0.159070000	31.0		
    T	51.511820000	-0.159990000	28.0		
    T	51.511900000	-0.160210000	27.0		
    T	51.512050000	-0.160810000	25.0		
    T	51.512070000	-0.160950000	24.0		
    T	51.512060000	-0.161860000	24.0		
    T	51.512070000	-0.162120000	24.0		
    T	51.512120000	-0.162250000	25.0		
    T	51.512170000	-0.162310000	25.0		
    T	51.512230000	-0.162330000	25.0		
    T	51.512300000	-0.163420000	25.0		
    T	51.512300000	-0.163800000	25.0		
    T	51.512170000	-0.165950000	28.0		
    T	51.512120000	-0.166450000	28.0		
    T	51.511710000	-0.169610000	29.0		
    T	51.511660000	-0.170250000	30.0		
    T	51.511610000	-0.171350000	27.0		
    T	51.511610000	-0.171850000	25.0		
    T	51.511640000	-0.172120000	24.0		
    T	51.511550000	-0.172170000	24.0		
    T	51.511500000	-0.172210000	24.0		
    T	51.511410000	-0.172510000	25.0		
    T	51.511340000	-0.172570000	25.0		
    T	51.511270000	-0.172590000	26.0		
    T	51.511140000	-0.172540000	26.0		
    T	51.511070000	-0.172450000	27.0		
    T	51.510830000	-0.172000000	29.0		
    T	51.510520000	-0.171340000	30.0		
    T	51.510290000	-0.170890000	27.0		
    T	51.510180000	-0.170760000	26.0		
    T	51.510000000	-0.170630000	25.0		
    T	51.509880000	-0.170580000	25.0		
    T	51.509710000	-0.170540000	25.0		
    T	51.508700000	-0.170410000	23.0		
    T	51.507870000	-0.170350000	23.0		
    T	51.507470000	-0.170290000	22.0		
    T	51.507350000	-0.170290000	21.0		
    T	51.507200000	-0.170350000	21.0		
    T	51.506990000	-0.170560000	20.0		
    T	51.506860000	-0.170710000	20.0		
    T	51.506690000	-0.170960000	20.0		
    T	51.506590000	-0.171170000	20.0		
    T	51.506570000	-0.171260000	20.0		
    T	51.506570000	-0.171340000	20.0		
    T	51.506730000	-0.171970000	20.0		
    T	51.506720000	-0.172070000	20.0		
    T	51.506660000	-0.172190000	20.0		
    T	51.506600000	-0.172240000	20.0		
    T	51.505700000	-0.172950000	22.0		
    T	51.505610000	-0.173010000	22.0		
    T	51.505290000	-0.173070000	22.0		
    T	51.505030000	-0.173190000	23.0		
    T	51.504230000	-0.173770000	23.0		
    T	51.503780000	-0.174140000	23.0		
    T	51.503210000	-0.174500000	23.0		
    T	51.503080000	-0.174550000	23.0		
    T	51.502890000	-0.174570000	24.0		
    T	51.502270000	-0.174570000	25.0		
    T	51.502280000	-0.174780000	26.0		
    T	51.502260000	-0.174830000	26.0		
    T	51.502150000	-0.174830000	27.0		
    T	51.502080000	-0.176250000	26.0		
    T	51.501770000	-0.180350000	24.0		
    T	51.501630000	-0.180240000	23.0		
    T	51.500690000	-0.180050000	21.0		
    T	51.500690000	-0.180060000	21.0		
    T	51.498850000	-0.179690000	20.0		
    T	51.496480000	-0.179170000	17.0