This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Upd to 6.1 shows IQ in my WF

Since yesterday I have the V6.1. My own WF shows me an IQ after the WakeUp from ScreenSaver. It happens when I bring the WF back by tipping the screen or push the lower right button.
But when I swipe from a widget to the WF it works?!

Any ideas? I never had that problem after updates…

Thanks!

The WF is called MyTime V2. Restart, reinstall, … didnt help.

Top Replies

All Replies

0 jim_m_58 over 3 years ago

Check garmin/apps/log/ciq_log.yml on your watch. You should see the crash log.

0 garminfanki over 3 years ago in reply to jim_m_58

---
Error: Unhandled Exception
Time: 2021-07-24T07:15:18Z
Part-Number: 006-B3225-00
Firmware-Version: '6.10'
Language-Code: deu
ConnectIQ-Version: 4.0.1
Store-Id: eaa43361-7397-4b11-9e9d-76d48da1ab14
Store-Version: 42
Filename: B7NG2220
Appname: MyTime
Stack:
- pc: 0x1000f632

Thats all...

0 garminfanki over 3 years ago in reply to jim_m_58

I didn't change or update anything to that WF since months. Was there a bigger change I missed!?

0 ovekvam over 3 years ago in reply to garminfanki

Looks like you are using a third party watchface called MyTime. On the IQ page for this watchface, it says that Vivoactive 4 users must change to MyTime V2.

0 garminfanki over 3 years ago in reply to ovekvam

Why just with that update and not the updates before?!

There are 2 Versions. One for Watches with more capacities. Thats V2. Like in the description.

But I will check that.

0 garminfanki over 3 years ago in reply to ovekvam

But no. Because with my other WF, an older one called MyHex or so I got the same problem. And there is only one version.

0 garminfanki over 3 years ago in reply to garminfanki

And with the sim it works fine...

0 garminfanki over 3 years ago in reply to garminfanki

And it only happened when I do something active. After an SMS it goes back without problems..

0 sensovision over 3 years ago in reply to garminfanki

garminfanki said:
Why just with that update and not the updates before?!

There are 2 Versions. One for Watches with more capacities. Thats V2. Like in the description.

your best bet to find out what was changed is to ask the author of watchface, as he must know the reasons why V2 support Vivoactive 4 and first version no longer works correctly.

0 garminfanki over 3 years ago in reply to sensovision

I am the author!

You dont need to think about V1 or V2. Both worked since months without problems. V1 is for watches with less capacity. V2 for the rest. Thats all correct. You can‘t mix that.

another user had the same issue with his VA4 after updating to 6.1