There seems to be a bug in the Golf activity when using the Venu X1 to track a round of golf. When viewing the list of hazards, the list does not loop when using the up and down arrows to navigate. If the first point of interest displayed is say a bunker at 230 yards, and there is a bunker at 200 yards, the user is unable to access the yardage to the 200 yard bunker by navigating using the down arrow in the interface. In order to access the yardage of the 200 yard bunker, the user must cycle through the entire list of hazards using the up arrow all the way to the green before it cycles back to the 200 yard bunker. Further, If the user starts the "viewing hazards" mode and uses the down arrow at the first point of interest (beginning of the queue), or use the up arrow on the last point of interest (end of the queue), the user will be forced out of the "hazard viewing" mode. Ideally, exiting hazard mode should be controlled by the user. The user should be able to cycle back and forth through the hazards and the list should loop as it does on the Approach S62.
