Bike Indoor - Speed / Cadence Sensors

You need to set proper wheel size for the speed sensor. Please note, that in case of the trainer, it is NOT the real size of the bike's wheel. Try looking in the manual for the trainer for proper wheel size setting, or use google.

Hi

Wheel size is correct, and it works fine with zwift and RGT

Only venu 2 get incorrect values (Speed and distance)

Thanks

PauloR said:

it works fine with zwift and RGT

That's probably because zwift and RGT connect to trainer over FEC or FTMS and not speed/cadence profiles.

PauloR said:

Only venu 2 get incorrect values (Speed and distance)

What is the wheel size setting on your venu?

tmk2 said:

What is the wheel size setting on your venu?

It is manual with value of 2070 mm like the smart trainer

Read the following discussions:

https://www.trainerroad.com/forum/t/wheel-circumference-setting-for-elite-direto-trainer/65891/8

http://forum.elite-it.com/viewtopic.php?t=67

A notable excerpt:

About Direto:
- if you use my e-training app or software, you have to set the real circumference value of your wheel (for example, 2100mm)
- if you use a non-elite app or device (like Garmin), you have to divide the circumference value by 12.1 (for example, 2100/12.1= 173mm)

I do not have the Direto trainer, but from what I managed to figure out, 173 mm is the way to go.

tmk2 said:

I do

Thanks,

I will try to check the links and do some test before the weekend

Again, thanks for your support

Hi,

First test done and ... almost there