Advanced/Diagnostic Menu

if you mean the GPS status view as on the older Edges, there is no (public) such a service menu in the x40s... nobody answered it (by Garmin) why..

Thank you. it's always nice to have a diag menu available, though was trying to understand if such would exist, then if any calibration was available, specially for the 840 solar light sensor as it's definitely not working as it should (from another post (where i posted) i believe it's actually working opposite to what it should!....)

i guessed it how to reach for the diag menu. (with 23.10 beta it works now, i was trying to guess it now :D). the GPS Sat view page is different here, there are no visual green bars like before, only chars with gnss name, sat number, band type and signal strenght dB. and you need to scroll down through from GPS , GLO , GAL and BDS , probably in Japan or India the QZSS and the IRNSS are also shown, here in western EU only these 4 GNSSs are common and reachable with high C/N0

Thank you! i see the ambient sensor in the list which is a good sign for what i was searching for

am not in the beta (heard it makes the device a bit lagging and there are a few already putting comments on this in the forum) but when released (hopefully not lagging) I'll give a try in the diag menu

there are tons of submenus here, at least 4-5 pages , just i didnt attach every pics what i made, but if you need, i can share it.

Is there any menu for ambient pressure sensor? The air pressure shown on my device is always 1-2 hPa lower than actual value.

yes, there is. (but you cant set an offset)

Thank you! Still better than nothing.

I'm a bit confused of how to enter the diag menu in the latest firmware, cause there is no “>” button.