This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

RTL Trap error still 'active' on SW6.20

dzamilsvk
over 4 years ago

GPS LOSS happened to me y'day with 6.20 and GPS+GLONASS. Changing to GPS only mode did not help. turned off GPS and after few seconds 'GPS firmware updated' was shown at the bottom of the screen, enabling back any GPS combo did not help. Had to save the ride having already lost few miles and reboot the device.

I always turn on (not from sleep) my device and sync using cable before my ride, so not sure why this have happened again.

my error log (Debugging folder on the device):

[
{
"unit_id":"3304818033",
"product_name":"Edge 830",
"software_part_number":"006-B3122-00",
"ms_since_epoch":1602172680000,
"system_version":"6.20",
"build_type":"PRODUCTION",
"backtrace":"
Function Address: 0x6045E22C
Call Address at Function: 0x6045E39C

Function Address: 0x6045E22C
Call Address at Function: 0x6045E39C

Function Address: 0x6075929A
Call Address at Function: 0x607593F4

Function Address: 0x6075946A
Call Address at Function: 0x60759BD4

",
"error_cause":"RTL Trap",
"proprietary_info":{
"Commit ID":"984878c67aa24a57e97d5d71de018ad2ec5edc12",
"Time":"2020-10-8 17:58:0",
"Project Specific":"2020-10-8 17:58:0",
"CDP_LOG":"05DEF09,600E6DC9,605DEF19,600E6DC9,60605C65,600E6DC9,605DEF19,600E6DC9,605DEF19,600E6DC9,605DEF19,600E6DC9,605DEF19,600E6DC9,605EB115,600E6DC9,60605C65,60605C65,60605C65,60605C65,60605C65,605DEF19,60605C65,6020EB75,6045A201,6020D681,6045A201,6020D681,605C22B1,6020D681,6020D681,6045A201,6020D681,6045A201,6020D681,605C22B1,6020D681,6020D681,605DEF19,6020D681,6045A201,60605C65,60605C65,60605C65,60605C65,60605C65,600E6DC9,605EB115,605DE459,60608FFD,605E2331,6020BA7D,605DF229,6020BA7D,605CDEBD,605E0B99,",
"RTL Error Number":"6E5D802C",
"Error Message":"6045E39D",
"Task Name":"SYC main",
"Saved SP":"6226EBE0",
"Saved LR":"6045E39D",
"Saved PC":"6045E39D",
"R[0]":"6045E39D",
"R[1]":"00000000",
"R[2]":"00000000",
"R[3]":"00000000",
"R[4]":"00000000",
"R[5]":"00000000",
"R[6]":"00000000",
"R[7]":"00000000",
"R[8]":"00000000",
"R[9]":"00000000",
"R[10]":"00000000",
"R[11]":"00000000",
"R[12]":"00000000",
"R[13]":"00000000",
"R[14]":"00000000",
"R[15]":"00000000",
"cpsr":"00000000"
}

}
]

can this be analyzed? I was hoping that I will no longer see RTL TRAP with 6.20+ version

  • 0 over 4 years ago

    Y'day another device lockup, could not do anything, had to power cycle the unit. Luckily my track recording was not interrupted.

    [
    {
    "unit_id":"3304818033",
    "product_name":"Edge 830",
    "software_part_number":"006-B3122-00",
    "ms_since_epoch":1602419844000,
    "system_version":"6.20",
    "build_type":"PRODUCTION",
    "backtrace":" - Error type ( 8 ) err( 8 )",
    "error_cause":"8",
    "proprietary_info":{
    "Commit ID":"984878c67aa24a57e97d5d71de018ad2ec5edc12",
    "Time":"2020-10-11 14:37:24",
    "Project Specific":"
    M4 SSRS: 0x6
    M4 SRS: 0x6
    A7 SSRS: 0x6
    A7 SRS: 0x6",
    "Task ID":"0",
    "Task Name":"",
    "R[0]":"00000000",
    "R[1]":"00000000",
    "R[2]":"00000000",
    "R[3]":"00000000",
    "R[4]":"00000000",
    "R[5]":"00000000",
    "R[6]":"00000000",
    "R[7]":"00000000",
    "R[8]":"00000000",
    "R[9]":"00000000",
    "R[10]":"00000000",
    "R[11]":"00000000",
    "R[12]":"00000000",
    "R[13]":"00000000",
    "R[14]":"00000000",
    "R[15]":"00000000",
    "cpsr":"00000000"
    }

    }
    ]