This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Radar RTL 511

Hello, I have problems with the radar RTL 511. It works the radar or the light. Both together cannot be coupled. Does anyone else have this problem?

Top Replies

aweatherall over 5 years ago +1 suggested

The best way to pair the RTL as both a radar and a light is as follow.

Delete the current radar or light pairing from the Edge.

Next put the RTL in pairing mode. With the RTL off hold the power button…

All Replies

0 aweatherall over 5 years ago

The best way to pair the RTL as both a radar and a light is as follow.

Delete the current radar or light pairing from the Edge.

Next put the RTL in pairing mode. With the RTL off hold the power button down until the LED flashes purple. Then add it to the Edge as a light. It should then also add it as radar as well as part of adding it as a light

0 Markus over 5 years ago in reply to aweatherall

I have already tried this. I called the support earlier. This is a known issue.

0 jgforrest over 5 years ago in reply to Markus

Is that specific to the 511? I had the same issue on my 510 and had just done exactly what aweatherall describes and it paired correctly.

0 Markus over 5 years ago in reply to jgforrest

I just tried it again. It just does not work. The Edge finds both, but only connects to the radar sensor. Both are displayed in the Sensor Menu, but a connection is established only to the Radar Sensor.

0 aweatherall over 5 years ago in reply to Markus

Are you selecting both from the search or just the light?

0 Markus over 5 years ago in reply to aweatherall

I search only the light and add this. Then he automatically adds the radar sensor.

0 Markus over 5 years ago

The new firmware 3.50 does not fix the problem yet.

0 kd2357 over 5 years ago in reply to Markus

Add the missing device manual with the ant+ ID . ID is same for Radar and Light .

0 Markus over 5 years ago in reply to kd2357

both are in the list of sensors, but he connects only to the radar

0 Markus over 5 years ago in reply to kd2357

I have tried it several times. I reset the radar and then added both or just the light. it just does not work.