This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Remote controll not working with EPS V2 Campy

Hello,

On my edge 520 I use the right mode button on my Campagnolo EPS V2 to scroll through the pages after registering the Edge remote I can't seem to get that working on the edge 530. the Edge remote is not recognized by the 530 while it works fine with the 520

Can anyone guide me?

Thank you for your help

0 aweatherall over 4 years ago

I think you need to clear the 520 pairing from the EPS in order to form the pairing with the 530.

I know this has come up before on the forum.

0 aweatherall over 4 years ago in reply to aweatherall

If you are changing head units I think you will need to dissociate the EPS from 520 before you can pair it with the 530. When operating as a remote the EPS can only be associated with one head unit at a time.

Looking at the EPS documentation I found the following

Procedure of disassociation of the EPS, in REMOTE CONTROL mode, from one bike computer Keep the bike computer off Turn on the EPS and press 5 times the RH button MODE and 5 times the LH MODE button Turn off the EPS Turn on the bike computer, go to sensors setting, and disassociate the REMOTE CONTROL.

0 JJDE34 over 4 years ago in reply to aweatherall

Thank you very much, I had to start over several times, but in the end, the remote control was foun, very happy