This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Di2 WIreless and Automatic Gear setting

I am finding my 530 is not automatically picking up the settings from my 8050 front and rear derailleurs via the my wireless and the e-tube app. What might be causing this I am having to switch off automatic and select from the presets instead.

Top Replies

Garmin-Matthew over 5 years ago +1 verified

This was resolved in the most recent software version 4.10. For any future issues, please create a new thread.

All Replies

0 aweatherall over 6 years ago

I would check that the Di2 components are up-to-date, especially the EW-WU111 and battery

0 Johneed over 6 years ago in reply to aweatherall

All firmware up to date. The rear does update but the data field reports the previous values. The front incorrectly reports 53/39 instead of 50/34. Needs fixing?

0 aweatherall over 6 years ago in reply to Johneed

Strange I have no issue with it.

What model of D-fly are you using?

0 Johneed over 6 years ago in reply to aweatherall

Its the EWWU111. Working perfectly apart from auto picking up the derailleur gear ranges. Can just set manually but I've been swapping wheels with 11-30 and 11-32 cassettes so the auto setting would be slicker!

0 Greg.Marsden over 6 years ago

Auto mode on both the new and older D-fly were out to lunch, I had set the gears manually.

0 aweatherall over 6 years ago in reply to Greg.Marsden

Thanks. There was similar bug at one time on some of the other Edge models. I wonder if it got carried over. Let me check my settings again.

0 aweatherall over 6 years ago in reply to aweatherall

The automatic selection does not appear to be working. I had manually selected the correct size. When I intentionally selected the wrong size it was not corrected when the Edge established communication with the Di2 system.

I have raised a support ticket with Garmin on this,

0 Pdlpsher over 6 years ago in reply to aweatherall

Thanks for raising this issue with Garmin. I have the same issue on my 830. I just used the preset gears. On my 520 it picks up the gearing info. stored on Di2. It's not a big deal to me as preset gears is a good work-around.

+1 Garmin-Matthew over 5 years ago

This was resolved in the most recent software version 4.10. For any future issues, please create a new thread.