This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

VAM in mile/h when metric?

I suspect this is a bug...

Any hints why the VAM (vertical speed/climing rate) shows up as mile/h when the rest of the settings are in km/m (metric)?

Top Replies

0 KevinJames over 4 years ago

I suspect the value is correct, just the label is wrong. Should be (vertical) metres per hour.

Would be nice to climb at 497 mile/h though ;-)

0 aweatherall over 4 years ago

Try toggling the setting for the elevation unit of measure under units to force it to be re-cached in memory.

0 KevinJames over 4 years ago in reply to aweatherall

I don't think this is a metric/imperial issue. VAM is never measured in mile/h. It's either metres per hour or feet per hour

0 aweatherall over 4 years ago in reply to KevinJames

Is this in the post ride summary or on the real time training pages?

0 aweatherall over 4 years ago in reply to aweatherall

It reports OK on my unit using build 3.33

0 KevinJames over 4 years ago in reply to aweatherall

I've just checked my device and can recreate it by setting my language to Swedish (version 3.2)

0 aweatherall over 4 years ago in reply to KevinJames

Thanks.

0 michael67k over 4 years ago

Thanks you all for the info!

Changing to English is a workaround. I guess there is obviously something wrong with the Swedish translation.

+1 aweatherall over 4 years ago in reply to michael67k

I have passed this information on to Garmin.

You could hack the Swedish text file, if you felt like it. In the Text folder look for the Swedish.gtt file

Then look for the following and change it.

<str>
<tag>TXT_SUMMARY_HISTORY_meter_per_hour_STR_M</tag>
<txt>mile/h</txt>
</str>

0 michael67k over 4 years ago in reply to aweatherall

Thanks!
After changing in gtt file evrything works great.