This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Edge 1040 and Assioma's

Hello

Just switching to Garmin from another brand, so i know the pedals work. My 1040 will show the cadence but the watts from my pedals stays at 0. In the sensor setting everything looks like its setup fine and i have tried calibration in the head unit as well as the Assioma app as well. Speed and HR sensors are hooking up just fine and working. Firmware on both head unit and pedals updated to the latest.

Thoughts

Cheers

Mike

Top Replies

dash1e over 2 years ago +1

I'm using Edge 1040 with the Assioma Favero pedals, and I have no issue. Everything works fine.

All Replies

0 8905324 over 2 years ago

I should add the cadence is coming off the pedals just not the watts.

0 dash1e over 2 years ago

I'm using Edge 1040 with the Assioma Favero pedals, and I have no issue. Everything works fine.

0 joseba23 over 2 years ago

I also use the Favero in an Edge 1040 and everything is perfect

0 NeilJonesOnline over 2 years ago

IIRC, Assioma's offer both Bluetooth and ANT+ connections. Suggest trying re-pairing with your 1040 using the different connection type?

0 Deba over 2 years ago

What is the ant+ ID?

0 8905324 over 2 years ago

Thank you. i had tried unpairing and repairing a few times with no luck. Tried once more and it worked, not sure why, but i will take it.

Cheers

0 revord62 over 2 years ago in reply to 8905324

Pair using ant+ not bluetooth. I've been using Assioma's with an 830 and now a 1040 without any problems with power and cadence.