Hello all! In my recently rides, I noticed a large battery consumption. For example, yesterday it was like 20% per hour. I reset the device to factory settings and connect again the sensors (speed, cadence, heart rate and di2). Same situation.
The backlight is off.
Please advice how can I troubleshoot to identify the cause! From what I can remember, it is possible that this issue appear after the last update (i.e. 11.00).
Thanks in advance!
I think, battery consumption - especially in the cold - is mainly depending on backlight!
- and maybe really a little from the firmware - see my graphic...
Something of an update / possible source of the problem. I did several rides between Christmas and NY, both indoor and outdoors.
- Indoor rides, approx. 3%-4% drain p/hour
- Outdoor rides, (consistently…
Results of my Edge 1030 - v 11.0:
Indoor Activity at about 20°C: 8% per hour (backlight ever on at 30%)
Outdoor Activity at about 0°C: 30% and more per hour (backlight ever on at 80% - unintentionally)
What is noticeable with the outdoor activity: First minutes the device was still at room temperature - the battery consumption was as usual. But as soon as the device cooled down to 0°C, consumption rose to 30% and more per hour.
I don't think I would have noticed any difference with indoor training.
But the consumption during Edge operation at 0°C temperature already surprised me, but I have never run the 1030 at such a temperature before. This time I had it with me when I went for a walk because I wanted to test something else. (I don‘t bike below 10°C 
)
But I also have a second 1030 with former software. I will test both in parallel under the same conditions.
