Stryd Power not transfered to Strava anymore since Garmin activated native power.

Your Stryd power is still sent to Strava as Strava is receiving your recorded fit file with all the data. 

Strava has to implement a logic that, if native power in the fit file is empty, they must read the CIQ power data as before.

I'd check your setup. My stryd power was recorded and sent to Strava just fine this past Saturday. I have Garmin power set to auto, meaning it will only activate when the stryd pod is not detected 

Which Garmin power are you setting to auto? Wrist-based power or heart rate strap? And how? 

Skyewalkr said:

I'd check your setup. My stryd power was recorded and sent to Strava just fine this past Saturday. I have Garmin power set to auto, meaning it will only activate when the stryd pod is not detected 

Thanks for this. Although for clarity I would note that the relevant menu calls it Smart Mode, rather than Auto.

Got it now. Under app-specific settings. This changes the default from Wrist-based to accessory-based. I use a Garmin heart rate strap that also measures running power and that’s what I keep getting outputted to Strava in lieu of my Stryd data. Garmin says it will take running power from whichever accessory is connected to the device first, but that still doesn’t affect what shows up in Strava

Hi, I only read re your issue now, hope you have fixed it? If so, let me know how as I have same problem. Garmin registers a completely different (higher) power than Stryd does. I have tried to change all settings in Garmin connect and on Garmin watch but not been able to fix the problem. Hope you can inform me how you have fized it eventually?

Garmin will always record its own power levels and stryd power will be available if you want to see it via Connect IQ supplemental data fields. Garmin uses “passive recoil” energy in its power formula, the energy that is stored by gravity and ground impact then released from your elastic body parts like your tendons, so it’ll always be a higher value. Stryd only includes power from energy actively expended by your muscles. 

Just turn off Garmin power and everything will be as before. 

I have turned off Garmin power but still Garmin records power that is much higher than my Stryd power. As Garmin is connected to Strava this means that my Strava account also shows a way too high running power. 

I cannot confirm. For me the Stryd Power is shown in Garmin and also Strava.

There is no Garmin power, neither in Garmin or Strava. If you still have Garmin Power shown,

you have not properly disabled it. 

Run recorded with Garmin run profile and Stryd datafield installed.