This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Understanding ClimbPro on the Edge - Updated for build 9.50

aweatherall over 6 years ago

I thought it would be helpful to write-up how ClimbPro works on the Edge.

This write-up is based on the recent 9.50 software release.

New in Build 9.50 is

Estimated time to the top of the climb

Understanding ClimbPro on the Edge V1.9.pdf

Top Replies

aweatherall over 5 years ago in reply to BigRed-80 +1

Currently the newer Edge units do not allow the VP to be disabled. The only work around is to set the VP speed either very high or very low so that it is quickly out of range.

All Replies

0 SteveC over 6 years ago

Great document to describe the functionality.

Been using the 7.85 beta on a 6 day trip in Pyrenees and the ClimbPro worked amazingly well!! On rainy foggy days over Tourmalet it kept me sane knowing how far and how steep the long long climb was. Great work by Garmin on this one!

One very small observation, on one route we were following we started a col / climb but diverted to a different road. The navigation eventually re-routed but ClimbPro just paused on the original climb. Maybe the ClimbPro for that climb should have cancelled and exited after the re-route?

0 aweatherall over 6 years ago in reply to SteveC

ClimbPro should have canceled the current climb once you went off. Sounds like a bug.

0 svkaster over 6 years ago in reply to aweatherall

Would be great if i create a route on the Edge 1030 itself thar Climbpro would work. I knd of like it so far that i miss it when i go for a d-tour.

0 roadbiker65 over 6 years ago

first check on V8.06 ==> Climb Pro doesn't work for round-trip >100km. If you save the round-trip as course and reload it...then it's working.

I've sent the "Feedback Reporting Form" with the bug to GARMIN

Guido

0 xenis over 5 years ago

Thanks for the description but i have'nt found something.

What's the 2 points on the prfile? One is our position but what's second? Virtual partner or performance in segment?

0 aweatherall over 5 years ago in reply to xenis

0 Martin868 over 5 years ago in reply to mutnig

To avoid basecamp and connecting your Edge to the computer, you could have imported the GPX to Garmin Connect, save as a course, then use the mobile app to send to the Edge. The Connect import would have added the elevation information as well.

0 BigRed-80 over 5 years ago

Can you turn off the Virtual Partner on the ClimbPro? Its utterly pointless and irritating!

0 aweatherall over 5 years ago in reply to BigRed-80

Currently the newer Edge units do not allow the VP to be disabled. The only work around is to set the VP speed either very high or very low so that it is quickly out of range.

0 krazyeone over 5 years ago in reply to aweatherall

Yup , in the past I remember on Edge 810 that there was an functionality to turn off VP for all courses

Wonder why Garmin did not implement this to newest devices