This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Treadmill Calibration not sticking ?

Hi 

I on the lastest official firmware 14.10. I've been running on the same treadmill for 4 days now. At every run it has showed a 2 km difference, which I correct in the watch by calibrate and save option. The strange thing is that it should reduce the difference in the following runs which it is not doing. 

It's like it is not sticking and the calibration itselft is not being done. 

Anyone has see it ? Any suggestions ?

  • I am having exactly the same issue, also since upgrading to 14.10.  Every treadmill run (on the same treadmill and regardless of pace) reports a pace close to twice as fast as I'm actually running (despite going through the calibration step after each run).  

  • Same here.  The treadmill calibration on my 935 with the 14.10 update is not working. 

  • Exactly the same here, also since the update to 14.10

    I get the first km vibration from the 935 when the treadmill reads 1.85 km. This happens to be exactly 1 Nautical Mile. Recalibrating the watch has no effect at all.

    My guess is that something is that something is wrong with the unit conversion to metric, as the software is probably written in Imperial units.

  • Bonjour.

    Pareil, la distance du tapis ne correspond pas à celle de la montre (6,03 km sur le tapis et 4,64 km sur la montre).

    J'ai effectué une réinitialisation complète de la montre et une réinstallation de la dernière version 14.10 et ENCORE et TOUJOURS une grosse différence entre le tapis et la montre.

    Si les techniciens peuvent nous aider ....

  • Bonjour.

    En complément de mon message posté voici quelques données enregistrées ce matin: 

    - Cours sur tapis en continu de 31 min (5 min à 11 km / h + 5 min à 11,5 km / h + 20 min à 12 km / h)

    - La montre affiche une vitesse instantanée de 8,2 km / h sur les 5 premières minutes alors que je cours à 11 km / h (1 km sur tapis et 0,82 sur la montre).

    - Idem sur les 5 minutes suivantes 11,5 km / h sur tapis et 8.2 sur la montre.

    - Les 20 dernières heures - 8,3 km / h alors que je courais à 12 km / h sur le tapis (distance de 3,99 km sur le tapis et de 2,98 km sur la montre).

    Au final, j'ai couru 6,02 km sur le tapis alors la montre affiche 4,48 km (heureusement que je faisais une étalonnage de la montre hier).

    Je pense que le problème est situé au niveau de l'accéléromètre, trop, trop, et donc obligatoirement soit à distance.

  • Bonjour.

    Nouvelles données intéressantes ce matin. J'ai un capteur de vitesse "foot Pod" et grande surprise, voici les données enregistrées:

    - 30 min de course

    - 5 min à 11,00 km / h sur le tapis >>> La montre affiche 11.1 Km/h

    - 5 min à 11,5 km / h sur tapis >>> La montre affiche 11,6 km / h

    - 20 min à 12,00 km / h sur le tapis >>> La montre affiche 12,0 / 12,1 km / h

    Au final course de 6,02 km sur le tapis >>> La montre affiche 6,04 km

    Il y a donc un vrai problème avec les paramètres de la montre et avec l'accéléromètre qui a été reprogrammé a plusieurs reprises. Il y a donc fort à parier que la dernière version 14.10 ne vous parlez  bug.

  • Salut a tous.

    J'ai peu-être une solution au problçme.

    Faites un Hard Reset de la montre en maintenant le bouton light appuyé pendant 15sec. Une fois la montre éteinte, appuyer sur la touche back et rallumer la montre sans lâcher back. Par la suite un message apparaît en vous demandant si vous voulez effacer toutes vos données. Dire oui. La montre redémarre en vous demandant de choisir la langue et d'établir votre profil, vous remplissez. Par contre NE PAS CONNECTER la montre a votre téléphone il ne faut pas l'appareiller. Une fois tout fini, allez dans paramètre + système + mise à jour du logiciel et là, verifier que la version restauré soit la 13.10 et DESACTIVER IMMEDIATEMENT la mise a jour automatique.

    Une fois fais, vous pouvez reconnecter la montre avec votre téléphone et tous y réinstaller comme avant.

    Perso je n'ai pas testé car j'ai fait un échange de la montre, mais ca vaut peu-être le coup d'essayer en attendant la prochaine version et mise a jour de la montre >>> 15.10

  • I've seen the exact same problems during the last 2 weeks. It's nice that I'm not the only one, but it would also be nice to see a fix for the problem. Anyone heard anything from Garmin?

  • I just contacted Garmin which was unaware of the problem. I'm gonna send them some files and they will proceed from there. I also sent them this thread as information that I'm not the only one :)