https://forums.garmin.com/sports-fitness/cycling/f/edge-1040-series/437764/edge-1040-no-longer-reads-heart-rate-broadcast/2038937Thu, 18 Jun 2026 05:27:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:66f720ab-b615-4e70-b4d1-471356473ebd5495687Yes, downgrade helped to solve the issue. 1. Connect your Garmin to PC and open it in the Windows Explorer 2. Copy the file provided by peggatsch ( https://drive.google.com/drive/folders/1Zb5gwx9X5dggGJFozWf9OcPsEzOlQ_zB?usp=drive_link ) to the main Garmin folder 3. Create empty file called force.tmp in the main Garmin folder 4. Might need to restart Garmin and it will pick up the downgraded firmware.https://forums.garmin.com/outdoor-recreation/outdoor-recreation/f/fenix-8-series/438268/pool-swim-drain-after-22-35-updateThu, 18 Jun 2026 04:49:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:5551ab32-9ca8-4cf4-8b3a-bad60f29d63etal.lipshitzAfter 22.35 update, pool swim for 45min drained 12% battery. Very oddfenix 8 PROhttps://forums.garmin.com/sports-fitness/running-multisport/f/forerunner-970/437962/treadmill-distance-inaccuracy-after-latest-sw-update/2038932Thu, 18 Jun 2026 04:10:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:c67ca993-d071-44f9-b8da-3a4d85af0d2d6963868This is definitely a new bug in 17.33. I've been running on the same treadmill with 965 and then 970 for several years now. Calibration after a run always worked very well, next run would be very close in distance. First time ever my watch is completely off and doesn't change with calibration. I run at 9:15-9:30 min/mile and it constantly reads 11:15-12:00 min/mile. Frustrating because running tolerance is completely off as it takes the pre-calibration distance into consideration. Looks like it is also getting slightly worse every run (I calibrate after each run). First couple of runs on 17.33 were relatively ok (although 16.37 calibration was perfect) then the margin of error started getting wider. I believe the issue is with stride length (much shorter than before 0.84-0.87m vs 1.03m-1.07m on previous sw version) and vertical osc (is lower 8.1 vs 9). Looks like my cadence is similar. Distance discrepancy is consistent with shorter stride length. First run on upgrade from 16.37 to 17.33 was 5/29 10m showed 9.57m, 6/2 was 8m showed 7.2m, 6/3 was 12m showed 10.43m. Last few runs: 9m shows 6.5m, 5m shows 4.05m, 13m shows 10.17m, 11m shows 8.88m etc. Tried restarting watch too. Any bug fix on the horizon or other way to get stride and vertical osc. right again?https://forums.garmin.com/sports-fitness/running-multisport/f/forerunner-970/437962/treadmill-distance-inaccuracy-after-latest-sw-update/2038931Thu, 18 Jun 2026 04:00:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:60cf974f-966e-498f-8ebc-8b72d13cf7d86963868This is definitely a new bug in 17.33. I've been running on the same treadmill with 965 and then 970 for several years now. Calibration after a run always worked very well, next run would be very close in timing. First time ever my watch is completely off and doesn't change with calibration. I run at 9:15-9:30 min/mile and it constantly reads 11:15-12:00 min/mile. Frustrating because running tolerance is completely off as it takes the pre-calibration distance into consideration. Looks like it is also getting slightly worse every run (I calibrate after each run). First couple of runs on 17.33 were relatively ok (although 16.37 calibration was perfect) then the margin of error started getting wider. I believe the issue is with stride length (much shorter than before 0.84-0.87m vs 1.03m-1.07m on previous sw version) and vertical osc (is lower 8.1 vs 9). Looks like my cadence is similar. Tried restarting watch too. Any bug fix on the horizon or other way to get stride and vertical osc. right again?https://forums.garmin.com/outdoor-recreation/outdoor-recreation/f/fenix-8-series/437987/treadmill-calibration-not-working-after-22-35/2038927Thu, 18 Jun 2026 03:04:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:94b1a304-e533-4c0f-bf8a-445f7009613amaxcSame. This morning I run 1h at 5:13 and the watched indicated 3:58! Garmin - LF It used to worked properly....you broke it with 22.35 update, as mentioned Vivoactive 6 has the same issue with latest firmware also. I am also using same treadmill with the same watches for over a year! with good results.https://forums.garmin.com/beta-program/fenix-8-series/fenix-8-family-enduro-3-fenix-e---public-beta-reports/i/public-beta-22-xx/daily-suggested-workout-incorrectly-marked-as-completed-after-unrelated-treadmill-activityThu, 18 Jun 2026 02:53:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:38d685f0-29b4-4189-af87-c654d270ff732151797On recent Fenix 8 beta builds, my Daily Suggested Workout is being auto‑completed incorrectly when the suggested workout is a Recovery Run . Each morning I do a short, fast walk on the treadmill as a warm‑up. I start this as a normal Treadmill activity (not using the suggested workout). This treadmill session typically gets a Training Effect of “Recovery” . Later in the day, when I go to do my actual run, the watch shows that the Recovery Run suggested workout is already completed , even though I never started or selected it. I also have no option to redo it. It appears the watch is matching the Training Effect of my treadmill warm‑up with the Training Effect of the suggested workout , and is incorrectly marking the suggested workout as done. This behaviour only started appearing in recent beta versions. Expected behaviour: Only mark a Daily Suggested Workout as completed when the user explicitly starts that workout, not based on matching Training Effect from an unrelated activity. Steps to reproduce: Receive a Daily Suggested Workout that is a Recovery Run . Start a normal Treadmill activity in the morning (not the suggested workout). Complete a short walk that results in a Recovery Training Effect. Later attempt to start the suggested workout. Watch shows the workout as already completed. Impact: Prevents me from performing the intended suggested workout later in the day.Suggested Workouts22.37fenix 8bughttps://forums.garmin.com/beta-program/fenix-8-series/fenix-8-family-enduro-3-fenix-e---public-beta-reports/i/public-beta-22-xx/daily-suggested-workout-incorrectly-marked-as-completed-after-unrelated-treadmill-activity-1003847696Thu, 18 Jun 2026 02:53:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:b61bcc2a-bfeb-450c-9230-5b6d1d12ca7f2151797On recent Fenix 8 beta builds, my Daily Suggested Workout is being auto‑completed incorrectly when the suggested workout is a Recovery Run . Each morning I do a short, fast walk on the treadmill as a warm‑up. I start this as a normal Treadmill activity (not using the suggested workout). This treadmill session typically gets a Training Effect of “Recovery” . Later in the day, when I go to do my actual run, the watch shows that the Recovery Run suggested workout is already completed , even though I never started or selected it. I also have no option to redo it. It appears the watch is matching the Training Effect of my treadmill warm‑up with the Training Effect of the suggested workout , and is incorrectly marking the suggested workout as done. This behaviour only started appearing in recent beta versions. Expected behaviour: Only mark a Daily Suggested Workout as completed when the user explicitly starts that workout, not based on matching Training Effect from an unrelated activity. Steps to reproduce: Receive a Daily Suggested Workout that is a Recovery Run . Start a normal Treadmill activity in the morning (not the suggested workout). Complete a short walk that results in a Recovery Training Effect. Later attempt to start the suggested workout. Watch shows the workout as already completed. Impact: Prevents me from performing the intended suggested workout later in the day.Suggested Workouts22.37fenix 8bughttps://forums.garmin.com/outdoor-recreation/golf/f/approach-g82/435248/approach-g82---tempo-putter-calibration-option/2038925Thu, 18 Jun 2026 02:13:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:c210d8c0-f074-4d2e-b28c-bb8a02a320e9Garmin - MRThis was corrected in the recent software update version 6.03. Please update the Approach G82 to the most current version to resolve this situation. If you notice any similar situations after the 6.03 software update, please create a new thread.https://forums.garmin.com/outdoor-recreation/outdoor-recreation/f/fenix-8-series/437987/treadmill-calibration-not-working-after-22-35/2038924Thu, 18 Jun 2026 01:58:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:0eb3a4b9-f719-4bcc-b5c2-69ad9679d218lucklukNo, you are not the only one. I reported accelerometer’s problems months ago with no reply. in this case, since new firmware, it got worse. An 800+ € watch only serves as a heart rate monitor (and with better accuracy but not to be proud about) in my case, despite following “instructions “ in this thread, with constant pace during 90min , I made half marathon for the Fenix 8 47mm while treadmill registered 15km (6 min/km). And this is happening despite distance calibration. I upload 2 photos : 1st after 65min and second the remaining 25 min( treadmill max time is 60 min for sesión) this comes with many other problems reported by users , such as farming express problems, with no solution in months. If garmin expects customers buying a new watch if 1000€ every year and a half maybe they are expecting too much, but seems clear that the lack of new features, proper support and updates solving 3 items and messing up either 10 extra reflects they are focused in fenix 9 instead of fenix 8. so I leave the photos and Don’t expect anything from support, as usually.. 1st one is total time of the workout. 15.15km, and the other 2 photos refer to 65min status ( max time for treadmill including 5 min extra of speed decrease ( not used for that, just same pace). For the clock I made half marathon ….. and it was calibrated 2 days ago.https://forums.garmin.com/outdoor-recreation/outdoor-recreation/f/tactix-8/406405/shot-timer/2038923Thu, 18 Jun 2026 01:52:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:fd1afed4-4f82-4b60-b4f4-2906a20232102363616I mean, that's part of why I think that the tactix 8 probably has the hardware to work as well, if not better than the Shotmaxx line up, given that they're fairly old, and likely packed less applicable sensors than the tactix 8. I just brought them up to illustrate that a wrist-based shot timer isn't unrealistic, and with the sensor suite of the tactix 8, I can definitely see the tactix 8 being a viable wrist-based shot timer.https://forums.garmin.com/outdoor-recreation/golf/f/approach-s70/432200/system-software-25-11-approach-s70-not-recording-rounds/2038921Thu, 18 Jun 2026 01:07:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:74cce18d-8185-4ee8-b6e1-aedbb0da259bGarmin - MRThis has been resolved with the latest software update. Please ensure your Approach S70 is up to date with the software version 27.07. If you happen to see this situation again after updating to version 27.07, please create a new thread.https://forums.garmin.com/outdoor-recreation/outdoor-recreation/f/enduro-3/433774/enduro-3-screen-freezes-21-39/2038920Thu, 18 Jun 2026 01:01:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:dc56d290-2fcc-4787-9e4d-c86e4f465ae9Garmin - MR9293580 ** Just checking back in on this situation. Are you still experiencing this with your Enduro 3, or has this situation been resolved? We have not received any other reports of this happening so far.https://forums.garmin.com/outdoor-recreation/outdoor-recreation/f/fenix-8-series/433374/reboot-on-version-21-39/2038919Thu, 18 Jun 2026 00:43:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:4c4a7b39-76cf-4bdb-8d58-7d89aacb3e81Garmin - MRThis has been resolved with software version 22.35. If your device has not already received the updates, sync your device with the Garmin Connect app or you can update through Garmin Express . If you notice this behavior after updating the software to version 22.35, please create a new thread and we will investigate.https://forums.garmin.com/outdoor-recreation/outdoor-recreation/f/fenix-7-series/433045/map-manager-showing-not-existent-updates/2038918Thu, 18 Jun 2026 00:37:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:88e7d8f5-f708-42a9-b7a1-e3de643f9379Garmin - MR4863353 ** I apologize for the delayed response. We do have a team investigating this and we do have a few questions to further review this situation. Is this occurring with any map update or installation? (i.e. TOPO and OM+) Have you tried more than one network? Does other data from the watch sync over the same network? What happens when you attempt to update with Garmin Express? Does this also happen in Garmin Express? Would you be willing to send a video of this to us? If so, we can reach out via email with additional steps.https://forums.garmin.com/sports-fitness/healthandwellness/f/vivoactive-6-series/437438/17-33-vivoactive-6-now-buggy-for-scoring/2038917Thu, 18 Jun 2026 00:26:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:dbef4f03-c00f-4377-8dba-490a7af9b9adelwin133Played different course today. Maybe 5 holes auto advanced to ask for score. Others I had to manually enter score and scroll to next hole.https://forums.garmin.com/outdoor-recreation/outdoor-recreation/f/fenix-7-series/408931/garmin-fenix-7-pro---disappearing-hill-scores/2038916Thu, 18 Jun 2026 00:13:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:7cc1f629-3242-41cb-970e-60f0df95ca21jan.shimFor a few months I've been hiking a lot training for a 100 miler. I haven't been able to run much due to a knee injury and as a result all my training activities including biking have been in Zones 0-1 rarely ever touching Zone 2. Before this I've always had a Hill Score.https://forums.garmin.com/outdoor-recreation/outdoor-recreation/f/fenix-8-series/434206/restart-while-viewing-the-morning-report---fenix-8-pro/2038911Wed, 17 Jun 2026 23:15:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:0415813a-b6f8-4159-b08a-fccd3a85dc84Garmin - LFHello Mierzej87 If you are still experiencing the reboots, I would love to continue to investigate this. I will reach out to you via Private Message for this. For the concern with the display remaining black: First, plug the watch into a power source. If this does not work, move onto the next step. Wear the watch on your wrist and ensure it reading heart rate (the green lights on the bottom of the watch will flash when reading HR). Press and firmly hold the Light button (top left) for 20 seconds or until you see the optical heart rate lights turn off. This will guarantee that your watch has turned off. Wait and see if the OHR lights come back on. If they do not, firmly press and release the Light button to turn the watch back on. Once the OHR lights turn back on see if your watch display is now working. If you are still experiencing the black screen after these steps post a new thread for this, as this is not related to this Morning report concern.https://forums.garmin.com/developer/connect-iq/f/discussion/438242/edge-1040-50-fonts/2038909Wed, 17 Jun 2026 22:56:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:62d044a7-4ff0-4b99-86f4-b927a8e88e81jim_m_58Not sure what you mean, they are just different sizes. Here they are on the 1040 for example. The small number to the right is the height. Here's the code for this part //(in onUpdate) y=titleH; dc.drawText(width/2,0,Gfx.FONT_TINY,"Num2",Gfx.TEXT_JUSTIFY_CENTER); y=doFont(dc,width/2,y,Gfx.FONT_NUMBER_MEDIUM,"0246"); y=doFont(dc,width/2,y,Gfx.FONT_NUMBER_MILD,"1357"); function doFont(dc,x,y,font,str) { dc.drawLine(0,y,width,y); dc.drawText(x,y,font,str,Gfx.TEXT_JUSTIFY_CENTER); var x2=x+dc.getTextWidthInPixels(str,font)/2+5; var fh=dc.getFontHeight(font); dc.drawText(x2,y+fh/2,Gfx.FONT_XTINY,""+fh,Gfx.TEXT_JUSTIFY_LEFT|Gfx.TEXT_JUSTIFY_VCENTER); y=y+fh; dc.drawLine(0,y,width,y); return y; } There's the same thing on the 1050https://forums.garmin.com/outdoor-recreation/outdoor-recreation/f/fenix-8-series/438212/fenix-8-amoled---pacepro-display-bug/2038908Wed, 17 Jun 2026 22:49:00 GMTa9571b57-dd57-479e-8763-8f8a603e40aa:1632ad90-1f36-4eac-94ff-c7afc2b09ae9Garmin - LFHello drkglb I would love to help investigate this. For this, I have some additional questions. When did this start? Have you tried ending the pacepro plan, and adding a new one? Have you tried powercycling the watch? What model of phone and OS version are you using? Does this only effect PacePro? Or recording any activity? Is this PacePro plan for a course or Race? And is this for Run or Trail Run?