Fenix 6 to concept bikeerg .

Maybe this article helps... https://www.concept2.com/news/connecting-garmin-devices-to-pm5

 Hi there.  Yes I have tried this.

the watch works well on my concept 2 rower.  All data is accurately recorded.

on my bikeerg, the watch connects, I use indoor bike, free ride, but the data is totally wrong.  When finished a 15 minute cycle I have travelled 500 plus miles and average speeds of 2000 plus mph.

i just want to connect to bikeerg pm5 and when finished save data and look at it on my phone or iPad through Garmin connect.  When I do this now it’s totally way out.

am I connected to the correct ant+.?  I have tried both connections separately and together, still rubbish.  Any advice please?

Alex

I had this exact issue, and it was solved by a firmware update on the PM5:

https://www.concept2.com/service/monitors/pm5/firmware

The Bikerg is actually pretty fantastic with the Fenix. I’m getting an ANT+ Power connection and an ANT+ Speed/Cadence connection. You can turn on both to broadcast on the latest PM5 firmware. Good Luck!

Thanks.  How do I check firmware if update required?