I accidentally got an HRM-RUN GEN 1 with FW 6.3

Which doesn't have some datas of Running Dynamic like Vert. Ratio, Stride length, and GCT BALANCE. I used to have fenix 3 for years so I knew that the problem would be solved by update FW to 6.6 but I don't know how to update the HRM RUN via my Fenix 6X.

Please give me a piece of advice.

Parents
  • Your problem is solved easily with the HRM RUN 1 update.
    - You need to copy the HRM-Run_660.gcd file to Garmin / RemoteSW
    - Connect the sensor, then do not remove it until the process is completed
    - check sensor status
    - enter in hours - System - Software Update
    One of the proposed options will receive a message about a new sensor firmware
    - reload the watch
    Check the version of the sensor 6.60, run with gps and enjoy running metrics.

    We have updated both on the 945 and on Fenix 6   https://yadi.sk/d/LD1gUFMhTYKz4A

Reply
  • Your problem is solved easily with the HRM RUN 1 update.
    - You need to copy the HRM-Run_660.gcd file to Garmin / RemoteSW
    - Connect the sensor, then do not remove it until the process is completed
    - check sensor status
    - enter in hours - System - Software Update
    One of the proposed options will receive a message about a new sensor firmware
    - reload the watch
    Check the version of the sensor 6.60, run with gps and enjoy running metrics.

    We have updated both on the 945 and on Fenix 6   https://yadi.sk/d/LD1gUFMhTYKz4A

Children