Approach G82 - Recent Threads

RE: Integrate G82 radar data directly into Garmin Golf round shot history

Garmin - LF — Thu, 13 Aug 2026 21:29:15 GMT

Hello feataXe Garmin is always looking for ways to improve their products. So I would recommend submitting this suggestion here, for Garmin's consideration: https://www.garmin.com/en-US/forms/ideas/

Integrate G82 radar data directly into Garmin Golf round shot history

feataXe — Tue, 11 Aug 2026 20:23:19 GMT

Feature Request: Integrate G82 radar data directly into Garmin Golf round shot history
I would like to suggest deeper integration between Garmin Approach watches, the Approach G82 radar, and the Garmin Golf app.
The G82 already measures useful radar data during a round, while devices such as the Approach S70 already track the actual shot location, hole, score and GPS result.
It would be extremely useful if Garmin could combine these two data sources into one shot record.
For example:
Start a round on an Approach S70 or G82.
Use the G82 radar for each shot during the round.
Automatically match the radar measurement to the corresponding GPS shot using time, active hole and round data.
When viewing the round later in Garmin Golf, tapping an individual shot would show:
Club head speed
Ball speed
Smash factor
Swing tempo
Launch angle, if the G82 hardware is technically capable of supporting this in the future
Carry and total distance from the radar are not essential in this use case because Garmin already knows the actual GPS distance of the shot during the round.
This would create a much more useful picture of every shot: Garmin would show not only where the ball went, but also how the shot was produced.
I would also strongly suggest adding:
Full shot-by-shot history for every hole in Garmin Golf.
The ability to export an entire round, including shot locations and radar metrics, to CSV.
Better synchronization between an active round on an Approach watch and the G82.
Ideally, one active round shared across compatible Garmin Golf devices instead of separate independent sessions.
A possible exported structure could include:
Date | Course | Hole | Shot | Club | GPS start | GPS end | Actual shot distance | Club speed | Ball speed | Smash factor | Tempo | Launch angle
This would be extremely valuable for golfers who use Garmin for performance analysis and statistics.
Garmin already has most of the required hardware and data within the ecosystem. Combining the data in Garmin Golf would make the S70 + G82 + CT10 ecosystem significantly more powerful without requiring additional hardware.
Thank you for considering this idea.

Garmin G82 - Measure Shot isn't working?

Former Member — Sat, 18 Jul 2026 22:21:29 GMT

Try measuring a shot, it starts, then reverts to the main screen showing hole graphics. When going back into Measure shot, sometimes it's still there, but most times it is erased and wants the user to start again.

Software version 6.03

RE: Garmin G82 - Measure Shot isn't working?

Garmin - LF — Thu, 23 Jul 2026 21:51:43 GMT

Hello Thank you for the update. I am happy to hear this is now working.

RE: Garmin G82 - Measure Shot isn't working?

Former Member — Thu, 23 Jul 2026 12:04:57 GMT

Just an update. I'm not sure why the first time I tried this, it did not work. Ever since (3 more rounds) this function is now working. The screen still reverts to the hole graphics, and the user must find the 'measure shot' function again. But at least it's working.

RE: Cannot add additional CT10 sensors

Garmin - MR — Wed, 22 Jul 2026 23:28:52 GMT

We are currently investigating the symptoms you are reporting. At this time, we are gathering information for our engineering team while they try to find the cause of the issue so we can get a fix in place.

Cannot add additional CT10 sensors

onlyasboy — Sun, 28 Jun 2026 09:13:33 GMT

with the new software update, Tried to add new CT10 but the screen stuck at the above. Any resolution?

Review Title: Over-engineered, clunky, and reliant on hidden rules—a massive disappointment Rating: ⭐︎☆☆☆☆ (1 / 5 Stars)

5191092 — Wed, 22 Jul 2026 11:50:24 GMT

I bought the Garmin Approach G82 along with a full set of Approach CT10 sensors, expecting a top-tier, standalone golf handheld with rich on-device data. Instead, it has been an incredibly frustrating experience filled with poor UX choices, phone dependency, and severe documentation gaps.

If you are thinking about buying this setup, be aware of the following critical flaws:

Undocumented Data Loss (The "Scramble" Trap): The user manual fails to warn you that if your device scoring mode is set to Scramble, the G82 silently disables all CT10 sensor shot logging and Virtual Caddie calculations. I spent five full rounds religiously tracking my shots, only to find out Garmin threw all the club distance data away because of a background scoring setting.
Wasted Screen Real Estate & Phone Dependency: For a device with such a large, bright display, it shows remarkably little historical data. You cannot view detailed club distance matrices, edit scorecards, or review shot maps directly on the device—you are forced to pull out your smartphone or connect to a PC. Having to rely on a mobile phone app defeats the entire purpose of buying a premium standalone handheld.
Rigid Software Architecture: Completed scorecards are locked into read-only files. You cannot retroactively change a game type or fix scorecard errors on the unit. Furthermore, keeping score for a multi-player group on the device is awkward and clunky.
Over-Complicated Setup for Basic Tracking: On legacy Garmin units (like the G8), shot tracking was independent of scorekeeping. On the G82, Garmin forces you to run an active, individual Stroke Play scorecard just to get the device to save your club distances.

Verdict: For the money spent on the G82 handheld and a full set of CT10 sensors, the software experience is completely unpolished and overly restrictive. Garmin needs to overhaul its user manuals and push urgent firmware updates to allow on-device stat viewing and scorecard editing.

RE: Cannot add additional CT10 sensors

onlyasboy — Sat, 18 Jul 2026 02:08:26 GMT

Any updates? Its coming to a month and we are still not able to add clubs for the G82

Approac g82 cannot connect to garmin golf application

5485341 — Mon, 13 Jul 2026 02:07:41 GMT

Approac g82 cannot connect to garmin golf application, software version 6. 03 but wireless ver:0. 00 wireless status: 0 I have updated the software many times through garminexpress and hard reset. Please recommend it to me if you have any ideas.

RE: Cannot add additional CT10 sensors

8328662 — Wed, 08 Jul 2026 20:05:43 GMT

It is all listed above. It took 5 minutes for the Approach G82 to recognize the CT10 sensor. This was after the latest firmware update. Very slow. I purchased the G82 three weeks ago.

RE: Cannot add additional CT10 sensors

Garmin - LF — Wed, 08 Jul 2026 19:58:17 GMT

8328662 I can understand wanting to have this working normally again. I do see we have not yet received a reply from you regarding reporting details around what you are experiencing, so we can add you to this concern. I will reach out to you again via email to see if we can get you added, to help investigate this. Additional examples can help expedite a resolution.

RE: why cant you automatically track a shot?

Christian_ODQA — Wed, 08 Jul 2026 13:54:18 GMT

Unfortunately, the G82 does not have a accelerometer sensor and that is why it cannot track the shots automatically like most of our golf watches do. You can measure the shot by going through the golf menu and select Measure Shot to track that data. What you can also do attach some Approach CT10 sensors to your clubs and then pair those to the G82. The CT10s will then begin tracking your shots automatically.

That is also a great idea to be able to use the buttons to start measuring your shots. If you follow the link below this message it will bring you to our Share Ideas page. Filling out the Share Ideas form sends any and all ideas to our teams to get the feature/idea implemented as they see fit.

https://www.garmin.com/en-US/forms/ideas/

why cant you automatically track a shot?

Jojoe — Wed, 08 Jul 2026 03:28:18 GMT

this is such a subpar product, for its price if you want it to work like a GPS, it should automatically track shots, at least the distant, once you stand next to your ball, it should automatically use that as a starting point for your next shot?

also can you allow the use of buttons as short cuts? like tapping the shot monitor button twice to start tracking shot distance, doing it via a sub menu is super anti-intuitive and just make using this device during a round impractical....

this is so far a very bad device mostly due to bad software design

RE: Cannot add additional CT10 sensors

8328662 — Mon, 06 Jul 2026 19:27:37 GMT

An update, my Approach G82 finally recognized the sensor after a 5 minute wait. It worked but painfully slow. For a product of this price I expect that these issues to be resolved quicker. Disappointed with this Garmin product and the lack of a timely resolution. Firmware updates should be fully vetted prior to release.

RE: Cannot add additional CT10 sensors

Garmin - LF — Mon, 06 Jul 2026 17:52:16 GMT

Littlepaul66 We'd like to get you added to this investigation. I will be sending you an email to collect additional information, and get you added.

RE: Can't use along with a garmin watch

Christian_ODQA — Mon, 06 Jul 2026 15:49:31 GMT

The Approach G82 is a stand alone device and will not pair with a watch unfortunately. You are able to pair Approach CT10 sensors to it or a rangefinder like the Approach Z30.

If you keep score on the G82 the score will not be reflected on the watch. The watch and G82 will keep score separately during your rounds if you use them at the same time. If you are keeping score on both, I would be sure to only save one of the scorecards from the G82 or the watch so your scorecard and shot data can sync correctly.

Can't use along with a garmin watch

4379721 — Mon, 06 Jul 2026 15:32:33 GMT

Is there a way to make this thing work along with a garmin watch? RIght now it seems I can either track my game via the watch or the G82, not both.

RE: Cannot add additional CT10 sensors

Littlepaul66 — Sat, 04 Jul 2026 10:09:51 GMT

Hi Garmin. I have the same issue. I reset my device and now I cant add any sensors. It's really frustrating.

RE: Cannot add additional CT10 sensors

Littlepaul66 — Sat, 04 Jul 2026 09:23:17 GMT

I have the same issue. Reset my device and not cant add my sensors back

RE: Cannot add additional CT10 sensors

Garmin - AL — Thu, 02 Jul 2026 17:16:59 GMT

8328662 We'd like to get you added to this investigation. I will be sending you an email to collect additional information, and get you added.

RE: Cannot add additional CT10 sensors

8328662 — Wed, 01 Jul 2026 23:12:38 GMT

Same problem with G82

RE: Cannot add additional CT10 sensors

onlyasboy — Tue, 30 Jun 2026 14:10:37 GMT

Have submitted supporting facts and video. This seemed to be happening before for my MARQ watch too.

RE: Cannot add additional CT10 sensors

Garmin - AL — Sun, 28 Jun 2026 17:56:31 GMT

We are currently investigating an issue with symptoms like what you are reporting. At this time, we are gathering information for our engineering team while they try to find the cause of the issue so we can get a fix in place. onlyasboy I will be sending you an email to collect additional information. **

RE: Cannot add additional CT10 sensors

7110383 — Sun, 28 Jun 2026 11:52:57 GMT

I have same issue, can't pair with CT10. Running on 6.03.